Samsung AF28FSSDADFNMG, AF28FSSDAWKNFA, AF27FSSDAWKNER, AF28FSSDADFXFA manual Troubleshooting

Troubleshooting

Refer to the following chart if the air conditioner operates abnormally. This may save time and unnecessary expenses.

PROBLEM	SOLUTION
The air	• Check power status and then operate the air conditioner again.
conditioner	• Switch on the circuit breaker and then operate the air conditioner again.
does not work	• Check if the air conditioner is turned off by Off timer or Smart sensor.
at all.	Operate the air conditioner again by pressing the Power	button.
Front panel	• Check if there is a power failure.
	• Check if there is any object blocking the front panel from closing.
remains open.
	Remove the object and then operate again.
The temperature	• Check if you have selected Turbo/Purity mode. In these modes,
adjustment is	temperature adjustment is not available.
not working.
	• Check if the set temperature is higher (in Cool mode)/ lower (in Heat
	mode) than the current temperature. Press the Temp + or - button
	to set the temperature lower (in Cool mode)/ higher (in Heat mode
	than the current temperature.
	• Check if the Full HD Filter is blocked by dirt. If there is a lot of dust
	on the Full HD Filter, cooling (heating) performance may decrease.
	Clean them frequently.
	• Check if the outdoor unit is covered or installed near the obstacle.
	Take the cover off and take the obstacle away.
	• If you want to operate the air conditioner in the sunlight, cover the
Cool air does not	outdoor unit using curtains or etc.
	• If ice is formed on the outdoor unit during the heat mode, warm
come out of the
air conditioner.	breeze will not be generated. The defrost operation will start
	automatically.
	--The defrost operation time may change depending on the status of
	ice formation.
	• If the doors or windows are open, it may cause poor cooling
	performance. Close the doors and windows.
	• If you have selected Purity mode without selecting other mode, cool
	air does not come out of the air conditioner. Press the Mode button
	to select other mode.
	• Check if the pipe length is too long. When the pipe length exceeds
	maximum allowable pipe length, cooling (heating) performance
	may decrease.
	31

ENGLISH

칠레향 FAC MEMORY 냉난방_IBIM_EN_03892A(5).indd 31 2014-03-12 오전 9:33:09