![](/images/new-backgrounds/1176735/17673551x1.webp)
Problem | Solution | |
|
| |
I cannot change the | • When the Auto, Dry, or Fast mode is running or the good'sleep function | |
is running in the Cool mode, the air conditioner controls the fan speed | ||
fan speed. | ||
automatically and you cannot change the fan speed. | ||
| ||
|
| |
| • Replace the batteries in the remote control with new ones. | |
The remote control | • Make sure that nothing is blocking the remote control sensor. | |
• Check whether there are strong lighting apparatus near the air conditioner. | ||
does not work. | ||
| Strong light which comes from fluorescent bulbs or neon signs may interrupt | |
| the electric waves. | |
|
| |
The Timed on/off | • Check whether you pressed the SET button on the remote control after setting | |
function does not | ||
the time. | ||
work. | ||
| ||
|
| |
The indicator blinks | • Press the Power button to turn off the air conditioner or disconnect the power | |
continuously. | plug. If the indicator is still blinking, contact the service centre. | |
|
| |
Odours permeate | • Check whether the air conditioner is running in a smoky area. Ventilate the | |
room or operate the air conditioner in the Fan mode for 3 to 4 hours. (There | ||
in the room during | are no components used in the air conditioner that emit a strong odour.) | |
operation. | ||
• Check whether the drains are clean. Clean them regularly. | ||
| ||
|
| |
An error is indicated. | • If the indoor unit indicator blinks, contact the nearest service centre. Be sure | |
to pass the error code to the service centre. | ||
| ||
|
| |
Noise is generated. | • When refrigerant flow changes, noise may be generated, depending on the | |
status of the air conditioner. This is a normal operation. | ||
| ||
|
| |
Smoke is generated | • If may not be a fire but it can be a steam generated from the outdoor heat | |
from the outdoor | ||
exchanger while the defrost function is running in the Heat mode in winter. | ||
unit. | ||
| ||
|
| |
Water drops from the | • Condensation may develop when the ambient temperature changes | |
pipe connections of | ||
excessively. This is a normal operation. | ||
the outdoor unit. | ||
| ||
|
|
Cleaning and Maintenance
English 25