Samsung AR24JRSDBWKNMG manual Removing the Air filter, Cleaning the Air filter, English-28

Page 28

Cleaning the air conditioner

Removing the Air filter

Air filter

There is a hole on the bottom right side of the filter.

 

Put your finger in that hole to get a grip on the filter

 

and slightly push it up to release the hooks from the

 

bottom side. Then, pull it down to remove the filter

 

from the main body.

 

Cleaning the Air filter

Washable foam based air filter captures large particles from the air. The filter is cleaned with a vacuum or by hand washing.

Remove the Air filter from the main body.

Clean the Air filter with a vacuum cleaner or soft brush. If dust is too heavy, rinse it with running water.

Insert the Air filter back in its original position.

 

Dry the Air filter in a ventilated area.

 

 

 

 

 

 

• Clean the Air filter every 2 weeks. Cleaning term may differ depending on the usage and environmental conditions.

In dusty area, clean it once a week.

If the Air filter dries in a confined (or humid) area, odors may generate. If it occurs, re-clean and dry it in a well-ventilated area.

English-28

MG_BETTER_ON&OFF_A3050_IB&IM_DB68-05189A.indd 28

2/17/2015 2:56:35 PM

Image 28
Contents Air Conditioner Features of your new air conditioner Contents Safety precautions English-4English-5 01epPr arationFor Using English-6English-7 Do not place objects or devices under the indoor unit English-8For Cleaning English-9Operation ranges Checking before useEnglish-10 Technical Specifications English-11Checking the name of the parts Main partsDisplay English-12Remote controller buttons Checking the remote controllerEnglish-13 Remote controller display Low Battery warningStoring the remote controller Inserting the batteriesBasic function Press the button to set the desired fan speed Press the button to adjust the temperatureEnglish-16 Adjusting the air flow direction English-17Setting the On/Off timer Setting the On timerFfPress the Timer button select On press the or button  English-18Setting the Off timer English-19Er03mti ButtonMode Additional options available in modeEnglish-20 Step cooling function English-21Press the Options button 04 optioUsing the Fast function Using the Comfort functionEnglish-22 You can set the Comfort function to provide mild coolingUsing the Single user function Single user function is only available in Cool modeCancelled English-23Make the indicator blink and press the SET button Using the Virus Doctor functionEnglish-24 Using the Auto clean function Checking the usage timeEnglish-25 SettiSetting the Beep sound Resetting the Filter clean reminderSetting the Display option English-26Cleaning the air conditioner Cleaning the indoor unitCleaning the outdoor unit heat exchanger English-27Cleaning the Air filter Removing the Air filterEnglish-28 Remove the Air filter from the main bodyEnglish-29 Reassembling the Air filterTop of the Air filter into the main body.. ➀ Maintaining the air conditioner English-30Troubleshooting TemperatureAdjustment is not English-31Button or disconnect the power plug/switch Check the Drains have been cleared Regular MaintenanceError is indicated Heard when refrigerant flow movement changes. It is normalEnglish-33 General information07stin llan atio Choosing the installation location Installing the unitPower supply line, fuse or circuit breaker Indoor unitWhere sulfide gas exists Outdoor UnitEnglish-35 Reduce noise and vibrationWhen installing more than 1 outdoor unit When the air outlet is towards the wallEnglish-36  Figure DescriptionAccessories Accessories in the indoor unit caseAccessories in the outdoor unit case English-37Fixing the installation plate Optional accessoriesTools required for installation General Tools Tools for test operationsAssembling the hanger screw English-39This QR code for detail video of indoor unit installation Removing the screwsRemoving the Cover panel Before mounting the indoor unit English-40Assembling the Cover panel After mounting the indoor unit English-41Connecting the assembly cable Cable specificationConnecting the cable English-42Each wire is labeled with the corresponding terminal number Extend the assembly cable if necessaryEnglish-43 English-44 Smooth the cut edgesCut off the remaining foam insulation TorqueEvacuating the indoor unit Cutting or extending the pipeEnglish-45 Unscrew the caps at the end of each pipeCorrect Inclined English-46Cracked Drain hose installation English-47Change the direction only when it is necessary Changing direction of the drain hoseEnglish-48 Check for leakage on both side of the drain outletEnglish-49 Evacuating the connected pipesConnect a drain hose to the drain plug English-50 Adding RefrigerantOuter Torque Siphon Charge the refrigerant standing English-51Cylinder upright Upside down Performing the gas leak tests English-52Fixing the outdoor unit in place Outdoor unit installed on the wall by rackEnglish-53 Smart Install mode English-54English-55 Off / Blinking / OnFinal check and trial operation English-56Packing and unpacking guide English-57How to connect your extended power cables English-58Apply heat to the contraction tube to contract it After tube contraction work is completed, wrap it withEnglish-59 Questions or COMMENTS? 021-8255 CE