Operating to the Long Distance
The Long function is used to Cool /Auto(cool) your room as far as possible. In the Long function, the up/down orientation of air flow and fan speed are selected automatically.
1If necessary, press the 
(On/Off ) button.
Result: u The power indicator on the control panel comes on.
uThe indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Switched on
Stopped
lt will start up normally after three minutes.
2Press the 
button twice.
Result: u The air conditioner cools the room as far as possible. u The fan settings are adjusted automatically.
3 To adjust the temperature, press the | buttons one or more times |
until the required temperature is displayed. Possible temperatures | |
are between 18°C and 30°C inclusive. |
|
Result: u Each time you press the | buttons: |
-The temperature is adjusted by 1°C.
-The indoor unit beeps.
4If you wish to stop the Long function, press the 
button again.
Result: u The air conditioner is reset automatically to the previous mode, temperature and fan settings.
3To control the direction of the air flow, refer to page 14.
Note You can't control the airflow direction horizontally in the Long function.
AP50Q1C_IBIM_E