Be sure to read the manual carefully to ensure sufficient realization of the excellent performance of the unit.
Be sure to drill a hole in the wall necessary for installation before attempting to install the unit.
After completion of installation, be sure to perform a test operation of the unit to check for
any problem, and then deliver the unit to the customer if the test results are acceptable.
After completion of test operation, hand over the manual and warranty card to the customer.
As the installation work requires special skill, be sure to request a qualified dealer to take care of the installation of your unit; the user should not attempt to install his/her unit by himself/herself.
Do not attach any electric heating device or electric heater to the unit. Do not attempt to disassemble or modify the unit by yourself. (It may cause machine trouble, electric shock or fire.)
Accessory Parts List
No. | Part Name | Remarks |
1Drain hose
2 | Connecting pipe | ø9.52mm |
|
|
| (3/8 inch) |
|
3 | Connecting pipe | ø19.05mm |
|
|
| (3/4 inch) |
|
4 | Connection wiring (3 strand) | Piping | |
|
|
| |
|
|
| box |
5Insulation for piping
6Finishing tape
7Wire of sensor (2 strand)
No. | Part Name | Remarks |
8 | Drain plug |
|
9 | Cable tie |
|
10 | Putty |
|
|
| Piping |
11 | Pipe band | box |
12 | Cover hole |
|
13 | Screw |
|
gThe type and quantity may differ depending on the specifications.
AP50Q1C_IBIM_E