Removing Excess Humidity
If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much.
1 If necessary, press the 
(On/Off ) button.
Result: u The power indicator on the control panel comes on. u The indoor unit beeps.
IMPORTANT The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Switched on
Stopped
lt will start up normally after three minutes.
2 If the 
is not displayed on the control panel, press the 
button on the remote control one or more times until it appears.
Result: u The indoor unit beeps each time you press the
button.
u The air conditioner runs in the Dry mode.
Note You can change modes at any time.
3 To adjust the temperature, press the | buttons one or more times |
until the required temperature is displayed. Possible temperatures | |
are between 18°C and 30°C inclusive. |
|
Result: u Each time you press the | buttons: |
- The temperature is adjusted by 1°C. - The indoor unit beeps.
u The air conditioner starts removing the excess humidity;
the quantity of air is adjusted automatically.
4 The fan speed is selected automatically(
: Automatic).
5 To control the direction of the air flow, refer to page 14.
AP50Q1C_IBIM_E