Samsung AQ12NBMD2/XSV, AQ12NBMDXSV manual Airing Your Room

Page 15

Airing Your Room

If the atmosphere in your room is stale, you can air the room using the Fan feature.

1If necessary, press the (On/Off) button.

Result: The 5 Way indicator on the indoor unit lights up.

The air conditioner starts up in the mode selected when the unit was last used.

The indoor unit beeps.

2If the press the appears.

Result:

is not displayed at the top of the remote control,

button on the remote control one or more times until it

The indoor unit beeps each time you press the button.

The air conditioner runs in FAN mode.

The temperature is set automatically.

You can change modes at any time.

3Select the fan speed by pressing the button one or more times until the required setting is displayed:

Low

Medium

High

Result: Each time you press the button, the indoor unit beeps.

4To control the direction of the air flow, refer to pages 16 and 17.

E-15

Image 15
Contents OWNER’S Instructions Safety Precautions Contents Indoor Unit View of the UnitAir InletRear Air Outlet Connection Valve Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Way Function Even though you have lost your remote controlUsing with the indoor unit Selecting with the Remote ControlSET Temp Selecting the Automatic Operating ModeCooling Your Room Heating Your Room Except the cooling only models You can select the Heat mode only in the heat pump modelsChanging the Room Temperature Quickly Removing Excess Humidity Airing Your Room Recommendation Adjusting the Air Flow Direction VerticallyAdjusting the Air Flow Direction Horizontally Setting the On Timer To Cancel the On TimerMinutes to 24 hours To Cancel the Off Timer Setting the Off TimerTo Cancel the Sleep Timer Setting the Sleep TimerTopic Recommendation Operating RecommendationsHave switched off the breaker used for the unit Temperature and Humidity RangesCleaning Your Air Conditioner Mode Outdoor Temperature Indoor Temperature Indoor HumiditySolving Common Problems Installing a Filter Option Technical SpecificationsModel Indoor unit Power Supply Installation Manual Safety Precautions Fixing the Unit in Position Indoor Unit Deciding Where to Install the Air ConditionerMm or more Accessories in the Indoor Unit Case Air Conditioner and AccessoriesThen follow Steps Fixing the Installation PlateCooling only models Connecting the Assembly CablePurging the Unit Heat pump modelsTo install the drain hose, proceed as follows Installing and Connecting the Indoor Unit Drain HosePipe Installing and Connecting the Indoor Unit Assembly PipingUneven Thickness Cutting/Extending the PipingOne electric cable must be connected to the outdoor unit Connecting the Cables to the Outdoor UnitChecking Correct Earthing Fixing the Unit in Position Connecting Up and Purging the Circuit Use Vacuum Pump as shown at the figureIf you have used Then Performing Leak Tests To check for gas leaks on Then, using a leak detector CheckPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner This AIR Conditioner is Manufactured by