Samsung AQ12NBMDXSV, AQ12NBMD2/XSV manual Installing a Filter Option, Technical Specifications

Page 24

Installing a Filter (Option)

Deodorizing

filter

Bio-Pure Filter

The air conditioner can be fitted with a deodorizing and Bio-Pure filter to remove minute dust particles or odours. The service life of the filter is approximately three months depending on the time during which the air conditioner is used.

1Remove the vinyl packing from the filter.

Do not remove the packing from a deodorizing filter until you wish to use the filter, as it will lose its properties.

2Insert the filter in the filter holder and press the three insert tabs until you hear a click.

3Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit.

4Take out the existing filter and replace it with the new one.

Technical Specifications

Model Indoor unit

Power Supply

 

 

AQ09NBMD

 

AQ12NBMD

220V~, 50Hz

AS09NBMD

 

AS12NBMD

 

 

 

E-24

Image 24
Contents OWNER’S Instructions Safety Precautions Contents View of the Unit Indoor UnitAir InletRear Air Outlet Connection Valve Remote Control Buttons and Display Getting Started Inserting the Remote Control Batteries Even though you have lost your remote control Using with the indoor unitSelecting with the Remote Control Way FunctionSelecting the Automatic Operating Mode SET TempCooling Your Room You can select the Heat mode only in the heat pump models Heating Your Room Except the cooling only modelsChanging the Room Temperature Quickly Removing Excess Humidity Airing Your Room Adjusting the Air Flow Direction Vertically RecommendationAdjusting the Air Flow Direction Horizontally Setting the On Timer To Cancel the On TimerMinutes to 24 hours Setting the Off Timer To Cancel the Off TimerSetting the Sleep Timer To Cancel the Sleep TimerOperating Recommendations Topic RecommendationTemperature and Humidity Ranges Cleaning Your Air ConditionerMode Outdoor Temperature Indoor Temperature Indoor Humidity Have switched off the breaker used for the unitSolving Common Problems Installing a Filter Option Technical SpecificationsModel Indoor unit Power Supply Installation Manual Safety Precautions Fixing the Unit in Position Deciding Where to Install the Air Conditioner Indoor UnitMm or more Air Conditioner and Accessories Accessories in the Indoor Unit CaseFixing the Installation Plate Then follow StepsConnecting the Assembly Cable Purging the UnitHeat pump models Cooling only modelsInstalling and Connecting the Indoor Unit Drain Hose To install the drain hose, proceed as followsInstalling and Connecting the Indoor Unit Assembly Piping PipeCutting/Extending the Piping Uneven ThicknessConnecting the Cables to the Outdoor Unit One electric cable must be connected to the outdoor unitChecking Correct Earthing Fixing the Unit in Position Connecting Up and Purging the Circuit Use Vacuum Pump as shown at the figureIf you have used Then To check for gas leaks on Then, using a leak detector Check Performing Leak TestsPlacing the Indoor Unit in Position Checking and Testing Operations Explaining Operations to the Owner This AIR Conditioner is Manufactured by