Installation
Accessories
Installation site
Depending on the model that you have purchased, you are supplied with several accessories that can be used in a variety of ways.
01 Roller ring, to be placed in the centre of
01
the oven.
Purpose: The roller ring supports the turntable.
20 cm |
| 10 cm |
| ||
above |
| behind |
• Select a flat, level surface approx. 85 cm |
above the floor. The surface must support |
the weight of the oven. |
• Secure room for ventilation, at least 10 cm |
from the rear wall and both sides, and |
20 cm from above. |
• Do not install the oven in hot or damp |
02
03
02Turntable, to be placed on the roller ring with the centre fitting to the coupler.
Purpose: The turntable serves as the main cooking surface; it can be easily removed for cleaning.
03 Grill rack, to be placed on the turntable. |
Purpose: The metal rack can be used |
85 cm of the | 10 cm on | |
the side | ||
floor | ||
|
surroundings, such as next to other |
microwave ovens or radiators. |
• Conform to the power supply specifications |
of this oven. Use only approved extension |
cables if you need to use. |
• Wipe the interior and the door seal with a |
damp cloth before using your oven for the |
first time. |
Installation
IMPORTANT
in grill and combination |
cooking. |
Turntable
Remove all packing materials inside the oven. Install the roller ring and turntable. Check that the turntable rotates freely.
DO NOT operate the microwave oven without the roller ring and turntable.
English 9
2/23/2016 6:13:01 PM