installation
Safety instructions for the installation
This oven may be installed only by an approved electrician. The installer is responsible for connecting the appliance to the mains and in so doing for observing the relevant safety regulations.
•Ensure protection from live parts when installing the oven.
•The kitchen cabinet in which the oven is built in must satisfy stability requirements as specified in DIN 68930.
Technical specifications
Input voltage / frequency | 230 V ~ 50 Hz |
Volume (usable capacity) | 65 ℓ |
Output rating | max. 3400 W |
Net weight | approx. 29 kg |
Weight with packaging | approx. 34 kg |
Housing (W x H x D) | 595 x 595 x 566 mm |
Oven interior (W x H x D) | 440 x 365 x 405 mm |
Power connection
| 566 |
| 560 |
595 | 572 |
|
595
21
If the appliance is not connected to the mains with a plug, a
safety regulations. The power cable (H05
min. 1.5 m, 1.5 ~ 2.5 mm²) must be of sufficient length to be connected to the oven, even if the oven stands on the floor in front of its
of the cable clamp before you connect the power lines to the relevant connection terminals. The oven is earthed via the (
this plug must remain accessible after the oven is installed. Samsung will take no responsibility for accidents that originate from a missing or faulty earth connection.
Installation in the cabinet
This is a
•Observe minimum distances.
•Fix oven on both sides using screws
After installation, remove the vinyl protective film from the door to the appliance and the protective film from the interior surfaces of the oven.
min. 550
min. 590 |
|
max. 600 | min. 50 |
min. 560
Upper Cabinet
min.550 | min. 550 |
min.600
min. 50
min. 600
min.560
min. 560
Air flow
min. 50
Lower Cabinet
4_installation
1:54:33