Important Safety Instructions

Warning : RISK OF ELECTRIC SHOCK DO NOT OPEN.

•• TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL.

•• The slots and openings in the cabinet and in the back or bottom are provided for

necessary ventilation. To ensure reliable operation of this apparatus, and to protect it from overheat- ing, these slots and openings must never be blocked or covered.

-Do not cover the slots and openings with a cloth or other materials.

-Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

-Do not place this apparatus in a confined space, such as a bookcase, or built-in cabi net, unless proper ventilation is provided.

•• Do not place this apparatus near or over a radiator or heat resistor, or where it is exposed to direct sunlight.

•• Do not place a water containing vessel(vases etc.) on this apparatus, as this can result in a risk of

fire or electric shock.

•• Do not expose this apparatus to rain or place it near water(near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool etc.). If this appratus accidentally gets wet, unplug it and contact an authorized dealer immediately. Make sure to pull out the power cord

from the outlet before cleaning.
•• Do not overload wall outlets, extension cords or adaptors beyond their capacity,	since this

can result in fire or electric shock.

•• Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plug end, adaptors and the point where they exit from the appliance.

•• To protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

•• Before connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corrsponds to the local electrical supply.

•• Never insert anything metallic into the open parts of this apparatus. Doing so many create a danger

of electric shock.

•• To avoid electric shock, never touch the inside of this apparatus. Only a qualified technician should open this apparatus.

•• Make sure to plug the power cord in until it is firmly inserted. When removing the power cord, make sure to hold the power plug when pulling the plug from the outlet. Do not touch the power cord with wet hands.

•• If this appratus does not operate normally - in particular, if there are any unusual sounds or smells coming from it

-unplug it immediately and contact an authorized dealer or service center.Be sure to contact an authorized service center, when installing your set in a location with heavy

dust, high or low temperatures, high humidity, chemical substances and where it operates for 24 hours such as the airport, the train station etc. Failure to do so may cause serious damage to your set.

•• Use only a properly grounded plug and receptacle.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

•• To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable.

•• Do not allow children to hang onto the product.

•• Store the accessories (battery, etc.) in a location safely out of the reach of children.

•• Do not install the product in an unstable location such as a shaky self, a slanted floor or a location exposed to vibration.

•• Do not drop or impart any shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

•• Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or deter- gent. This may damage the appearance or erase the printing on the product.

•• Apparatus shall not be exposed to dripping or splashing.

••WARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL TIMES.

English

LP10IPLSBTZEN, LP08IPLSBTZEN, LP08IPLEBTZEN specifications

Samsung is renowned for its state-of-the-art technology and innovative products, and the LP08IPLEBTZEN, LP08IPLSBTZEN, and LP10IPLSBTZEN are no exceptions. These integrated circuits, primarily used in electronic devices, showcase Samsung's commitment to functionality, efficiency, and design excellence.

The LP08IPLEBTZEN is a highly efficient low dropout (LDO) linear regulator that provides a stable output voltage with a minimal difference between the input and output. This feature is particularly beneficial for battery-powered devices, as it prolongs battery life by minimizing energy loss. Capable of delivering up to 300mA, the LP08IPLEBTZEN also offers excellent transient response, making it ideal for devices that require quick adjustments to power demands.

Similarly, the LP08IPLSBTZEN serves as another variant of the LDO regulator, designed for similar applications but with a specific focus on lower noise and ripple output. This enhanced performance makes it particularly suitable for audio and sensitive analog circuits, ensuring high fidelity and reliability in sound reproduction. With a low ground current and a wide input voltage range, this regulator seamlessly supports a variety of power management architectures, allowing designers greater flexibility in their projects.

On the other hand, the LP10IPLSBTZEN represents a more powerful offering in this lineup, providing a higher output current capability of up to 1A. This makes it suitable for more demanding applications, including those needing robust power supply solutions. Its advanced thermal management features prevent overheating during prolonged operations, ensuring longevity and reliability.

In addition to outstanding electrical characteristics, all three regulators integrate low thermal resistance packaging, which enhances their durability and performance under various environmental conditions. Moreover, Samsung has engineered these devices to support a wide operating temperature range, making them applicable in both consumer electronics and industrial applications.

With a commitment to quality and innovation, these regulators exemplify Samsung's dedication to providing power management solutions that meet modern electronic demands. Their versatility, efficiency, and durability make them a preferred choice among engineers and designers seeking reliable power management options in their electronic circuits.