Troubleshooting
PROBLEM | SOLUTION | |
|
| |
Motor does not start. | Check cable, plug and socket. | |
| Leave to cool. | |
Suction force is | Check for blockage and remove. | |
gradually decreasing. | ||
|
| |
Low or decreasing | Please check filter and, if required, clean as illustrated in the instructions. if | |
suction. | filters are out of condition change them to new ones. | |
|
| |
Cord does not rewind | Pull the cord out | |
fully. |
| |
Vacuum cleaner does | Check hose and replace if required. | |
not pick up dirt. |
| |
Body overheating. | Please check filters, if required clean as illustrated in the instruction. | |
|
| |
Static electicity | Please decrease power suction. | |
This can also occur when air in the room is very dry. | ||
discharge. | ||
Please ventilate the room to air humidity become a normal. | ||
| ||
|
|