Safety information
WARNING Power related
Please prevent any risk of electric shock or fire.
–Do not damage the power cord.
–Do not pull the power cord too hard or touch the power plug with wet hands.
–Do not use a power source other than the national rated voltage and also do not use a multi outlet to supply power to number of devices at the same time.
–Do not use a damaged power plug, power cord or a loose socket outlet.
–Turn off the power before connecting or disconnecting the power plug to the socket outlet and make sure your fingers don’t come in contact with the pin of the power plug.
–Do not disassemble or modify the vacuum cleaner. When power cord is damaged, contact the manufacturer or service center to get it replaced by certified repairman.
–Clean dust or any foreign matters on the pin and contact part of the power plug.
If there’s any gas leak or when using combustible sprays such as a dust remover, do not touch the socket outlet and open the windows to ventilate the room.
–There is a risk of explosion or fire.
WARNING In use and maintenance
Do not use this product outdoors since it’s designed for household use only.
–There is a risk of malfunction or damage. * Outdoor cleaning : A stone, Cement
* A billiard room : Powder of a chalk * An aseptic room of a hospital
Do not use the vacuum cleaner to suck up liquids(such as water), blades, pins or embers.
–There is a risk of malfunction or damage.
Be sure children do not touch the vacuum cleaner when you use it.
–The children can get burn if the body is overheated.
Do not mount or make any physical impacts on the body.
–It may result in injury or damage.
Use the carrying handle for lifting or carrying the vacuum cleaner.
Do not lift or carry the vacuum cleaner putting a brush in the groove for storage.
Use a dry cloth or towel to clean the body and make sure to unplug the vacuum cleaner before cleaning. Do not spray water directly or use volatile materials(such as benzen, thinner or alcohol) or combustible sprays(such as a dust remover) for cleaning.
–If water or other liquid gets into the product and cause malfunction, turn off the power button on the body, unplug the power plug and then consult a service center.