Samsung RFG29PEPN1/SML manual Reattaching Refrigerator Doors, Disassemble the Freezer Drawer

Disassemble the refrigerator doors

1.With the door opened, remove the cap top table ( 1 ) with a flat-blade screwdriver(-). and close the door. Remove 2 screws holding down the cover hinge ( 2 ) and turn it with several wires connected.

2

1

2.Disconnect one connector ( 3 ) on the right side door and one connector ( 4 ) on left side door. To remove the water coupler from the hinge, twist and pull it from the hinge. Remove the water line ( 5 ) while pressing the marked part

( 6 ) of the water line coupler.

4

3

5

6

3.Pull and remove the hinge lever ( 7 ). Remove the ground screw ( 8 ) attached to the upper left and right door hinges with a philips screwdriver

(+). Remove the upper left and right door hinges ( 9 ).

7 8

9

4. Lift the door straight up to remove.

5. Remove the screw ( 10 ) attached to the
lower left and right door hinges with a philips
screwdriver (+). Remove the 2 hex head bolts
( 11 ) attached to the lower left and right door
hinges with an allen wrench (3/16”). Remove	up
the lower left and right door hinges ( 12 ).
12
10
11	01setting
Allen wrench

REATTACHING THE

REFRIGERATOR DOORS

To reattach the fridge doors after you have moved the fridge to its final location, assemble parts in reverse order.

DISASSEMBLE THE FREEZER DRAWER

1.Take out the upper drawer by lifting it up.

2.Remove the tilting pocket ( 1 ) by pulling

both support guards	1
( 2 ) upward at the
same time.	2
3. Take out the lower
basket ( 3 ) by lifting
the basket up from the	3
rail system.

4.Remove 4 hex head bolts from both sides with a socket wrench (10mm).

setting up _09

DA99-03957C-06.indb 9 2015. 5. 7.

�� 3:51