Operating your Refrigerator
USING THE CONTROL PANEL
1 |
|
| 4 |
2 |
|
| 5 |
3 |
|
| 6 |
10 | 7 | 8 | 9 |
( 1 ) Energy | Touching this button turns Energy Saver |
Saver | mode on and off. When you turn Energy |
| Saver on, the Energy Saver icon lights. |
| |
| Turn Energy Saver off and the icon |
| goes off. The Energy Saver function |
| automatically turns on. when power is |
| supplied to the refrigerator. |
| If condensation or water drops appear |
| on the doors, turn the Energy Saver |
| mode off. |
|
|
( 2 ) Freezer | Touch this button to set the freezer to |
(Hold 3 sec | your desired temperature. |
for Power | You can set the temperature between |
Freeze) | |
| |
| seconds to decrease the time needed |
| to freeze products in the Freezer. It can |
| be helpful if you need to quickly freeze |
| easily spoiled items or if the temperature |
| in the freezer has warmed dramatically |
| (For example, if the door was left open). |
|
|
( 3 ) Alarm | This button serves two purposes: |
/hold 3sec 1) To turn the door open alarm on and
for Filter | off |
Reset | If the door alarm is set to On, an alarm |
| beeps if any refrigerator door is left |
| |
| open for more than three minutes. The |
| beeping stops when you close the door. |
| The door alarm function is |
| On in the factory. You can turn it off by |
| touching and then releasing this button. |
| You can turn it back on in the same |
| fashion. The icon lights up when the |
| function is on. |
| 2) To reset the water filter life indicator. |
| After you replace the water filter, touch |
| and hold this button for 3 seconds to |
| reset the water filter life indicator. |
( 4 ) | Touching this button turns on the | |
Lighting/ | Dispenser LED lamp (under the display) | |
Hold 3 sec | in continuous mode so that it stays on | |
for C↔F | continuously. The button also lights | |
| up. If you want the Dispenser lamp to | |
| ||
| come on only when some one uses the | |
| dispenser, touch this button to turn the | |
| continuous mode off. Touch and hold | |
| this button for 3 seconds to switch the | |
| temperature units between °C and °F. | |
|
| |
( 5 ) Fridge | Touch this button to set the fridge to | |
(Hold 3sec | your desired temperature. You can set | |
for Power | the temperature between 34°F and 46°F | |
Cool) | (between 7°C and 1°C). Touch and hold | |
| this button for 3 seconds to decrease | |
| ||
| the time needed to cool products in | |
| the Refrigerator. It can be helpful if you | |
| need to quickly cool easily spoiled items | |
| or if the temperature in the fridge has | |
| warmed dramatically (For example, if the | |
| door was left open). | |
( 6 ) Ice Off | If you don’t want to make more ice, | |
(Hold 3 sec | touch this button. Also, pressing this | |
for child | button for 3 seconds turns on Child | |
lock) | Lock which locks the display panel | |
| and dispenser buttons so the buttons | |
| can not be used. The Child Lock icon | |
| lights up to indicate you’ve activated the | |
| Child Lock function. Press 3 seconds | |
| to unlock. | |
( 7 ) Ice | Touch this button to select your desired | |
Type | ice type. Cubed and crushed ice modes | |
| alternate when you press the button. | |
| This mode can not be used with the | |
(Cubed) (Crushed) | Water mode simultaneously. | |
|
| |
( 8 ) Water | Touch this button to dispense water. | |
| This mode can not be used with the | |
| ||
| Ice Type mode simultaneously. Water | |
Water | mode will be off if you touch the Ice Type | |
button. | ||
|
02operating
operating _13
2015. 5. 7. |
�� 3:51