For R-600a refrigerant models

WARNING only

•This appliance contains a small amount of isobutane refrigerant(R-600a), a natural gas with high environmental compatibility that is, however, also combustible. When transporting and installing the appliance, care should be taken to ensure that no parts of the refrigerating circuit are damaged. Refrigerant

squirting out of the pipes could ignite or cause an eye injury. When refrigerant leaks from the pipe, avoid any naked flames and move anything flammable away from the product and ventilate the room immediately.

-- Failing to do so may result in fire or explosion. In order to avoid the creation of a flammable gas-air mixture if a leak in the refrigerating circuit occurs, the size of the room in which the appliance may be sited depends on the amount of refrigerant used. Never start up an appliance showing any signs of damage. If in doubt, consult your dealer. The room must be 1 m3 in size for every 8 g of R-600a refrigerant inside the appliance. The amount of refrigerant in your particular appliance is shown on the identification plate inside the appliance.

SEVERE WARNING SIGNS WARNING FOR INSTALLATION

•This refrigerator must be properly installed and located in accordance with the manual before it is used.

•Do not install the refrigerator in a damp place or place where it may come in contact with water.

-- Deteriorated insulation of electrical parts may cause an electric shock or fire.

•Do not place this refrigerator in direct sunlight or expose to the heat from stoves, room heaters or other appliance.

•This appliance must be properly grounded.

Do not ground the appliance to a gas pipe, plastic water pipe, or telephone line.

-- You must ground the refrigerator to prevent any power leakages or electric shocks caused by current leakage from the refrigerator.

-- This may result in an electric shock, fire, explosion, or problems with the product.

-- Never plug the power cord into a socket that is not grounded correctly and make sure that it is in accordance with local and national codes.

•Plug the power plug into the wall socket firmly. Do not use a damaged power plug, damaged power cord or loose wall socket.

-- This may result in an electric shock or fire.

•Do not plug several appliances into the same multiple power board. The refrigerator should always be plugged into its own individual

electrical which has a voltage rating that matched the rating plate.

-- This provides the best performance and also prevents overloading house wiring circuits, which could cause a fire hazard from overheated wires.

•If the wall socket is loose, do not insert the power plug.

-- There is a risk of electric shock of fire.

•Connect the power plug in proper position with the cord hanging down.

-- If you connect the power plug upside down, wire can get cut off and cause fire or electric shock.

•Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a metal object, place a heavy object on the power cord, insert the power cord between objects, or push

the power cord into the space behind the appliance.

-- When moving the refrigerator, be careful not to roll over or damage the power cord

-- This may result in an electric shock or fire.

•Do not use a cord that shows cracks or abrasion damage along its length or at either end.

•If the power cord is damaged, have it replaced immediately by the manufacturer or its service agent.

•Do not bend the power cord excessively or place heavy articles on it.

•When moving the refrigerator, be careful not to roll over or damage the power cord.

-- This constitutes a fire hazard.

•Make sure that the power plug is not squashed or damaged by the back of the refrigerator.

•Keep the packing materials out of reach of

children.

-- There is a risk of death from suffocation if children put them on their head.

•The appliance must be positioned so that the plug is accessible after installation.

•Do not install this appliance near a heater,

inflammable material. Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

•Do not install this appliance in a humid, oily or dusty location, in a location exposed to direct sunlight and water (rain drops).

Safety information _03

DA68-02636D-02.indb 3

2015. 7. 3.

�� 9:04