
| IDENTIFICATIONS OF PARTS | |
REMOTE POWER CONTROL* |
| |
(REMOTE CONTROL MODEL ONLY) |
| |
SUCTION REGU- | HOSE* | |
LATOR | ||
| CORD | |
TUBE* | REWIND BUTTON | |
POWER CONTROL | ||
| SWITCH* | |
FLOOR | ON/OFF | |
BUTTON* | ||
NOZZLE* | ||
| ||
CYCLONIC |
| |
FILTER* |
| |
| HOSE CLAMP | |
RUG/FLOOR | DUST INDICATOR | |
SELECTOR | ||
|
▲
Features marked * may vary according to model.
ACCESSORY HANGER
ASSEMBLING THE
➀ ➁ | ➂ | ➃ |
1.Slide the free end of the extension wand into the nozzle tube.
2.Slide the narrow end of one extension wand into the other extension wand.
3.Slide the extension wand into the handle end of the hose.
4.Slide the hose clamp into the suction inlet of the unit.
*Option ➀Assemble the CYCLONIC FILTER with the handle and extension wand(depending on model).
➁Ajusting the telescopic tubes (depending on model).
*OPTION➀ |
*OPTION➁ |
EXTENDING : Holding narrow side of the telescopic tube with a hand, pull the hadle to the oppo- site side of it with another hand. SHORTENING : Push the handle to the narrow side
of the tube, hoding it with another hand.