Napoleon Fireplaces NPS40, NPI40 manual Cleaning The Burn Pot, BI-WEEKLYOR EVERY 10 BAGS OF PELLETS

29

CLEANING THE BURN POT

!WARNING

Make certain the heater has fully cooled (approximately 25 minutes) before opening the door and conducting service.

To clean the burn pot, open the door and knock away any debris on the burn
	Figure 40
pot. If severely clogged, remove the burn pot to gain better access.
If removing the burn pot set aside on a non-combustible surface. See Figure
40. Once removed, discard all material that has accumulated in the burn pot.
Make certain that all openings are clear of any build up of ash from the ledge
below the burn pot.

Re-install the burn pot ensuring it sits level in the heater. Also must ensure the ignitor and the burn pot locating notch line up when reinstalling the burn pot.

LOCATING NOTCH

IGNITOR

BI-WEEKLY (OR EVERY 10 BAGS OF PELLETS)

VACUUM FIREBOX

The more frequently you clean out the fl y ash, the more effi cient your heater will burn.

!WARNING

The fire box becomes very hot during operation. Let the heater cool completely before conducting service.

1.Open the viewing door. See Figure 35 and 36

2.Lift the burn pot out and set aside on a non-combustible surface.

See Figure 40. Remove the right and left louvres by lifting the louvres up and out of the fi rebox setting them on a non-combustible surface.

LOUVRES

FIREBOX AIR HOUSING

Figure 41

W415-0616 / C / 06.04.08