GE 60-960-95 Pager Delay, Call Wait Cancel, Dial Tone Detect, Local Phone Control partition 1

Pager Delay (02008)			Phone Options-Global (Default = 15 sec.)
This setting determines how long a report is delayed to a	￿To set the Pager Delay time:
pager, after the panel dials the pager number.	1.	With the display showing PAGER DELAY nn SECS (current set-
Note		ting), enter a delay time (0–30). The display flashes the
The Pager Delay time should not be set below 5 seconds,		entered setting.
unless absolutely necessary.	2.	Press # and the display shows the new setting.
Call Wait Cancel (02009)			Phone Options-Global (Default = none)

This feature lets you set up a dialing prefix to disable the call waiting feature before the panel makes its first dialing attempt to any programmed central monitoring station or downloader phone number. The prefix can be up to eight digits.

To enter pauses, press C.

To enter *, press and hold 7 for one second.

To enter #, press and hold 9 for one second.

￿To set up Call Wait Cancel:

1.With the display showing CALL WAIT CAN- CEL __ (or current setting), enter the desired prefix. The display flashes the entered setting.

2.Press # and the display shows the new set- ting.

￿To delete the Call Wait Cancel prefix:

!

Caution

DO NOT change this option from its default if the customer doesn’t	1. With the display showing CALL WAIT CAN-
have call waiting. Verify with the customer that they have call waiting	CEL __ (or current setting), press D.
with their phone service provider before changing this option from its
default. Changing this option from its default without call waiting
will prohibit the panel from calling the central station.

Dial Tone Detect (02010)		Phone Options-Global (Default = on)
When this setting is on, the panel begins dialing as	￿To set up Dial Tone Detect:
soon as it detects a dial tone. When this feature is	1.	With the display showing DIAL TONE DETECT OFF/ON (current set-
off, the panel begins dialing a few seconds after		ting), press 1 (off) or 2 (on). The display flashes the entered setting.
seizing the phone line.	2.	Press # and the display shows the new setting.

Note

There is no Dial Tone Detect on the last dialing attempt.

The following sections describe the phone option settings that appear under PARTITION 1-2.

A Phone Interface/Voice module must be installed for the system to use the settings under PHONE

OPTIONS— PARTITION 1-2.

Local Phone Control (partition 1: 0210,		Phone Options-Partition 1-2 (Default = on)
partition 2: 0220)
When this feature is on, the panel can be accessed	￿To set up Local Phone Control:
from a phone on the premises.	1.	With the display showing LOCAL PHONE CTRL OFF/ON (current set-
		ting), press 1 (off) or 2 (on). The display flashes the entered setting.
	2.	Press # and the display shows the new setting.
Remote Access (partition 1: 0211, par-		Phone Options-Partition 1-2 (Default = on)
tition 2: 0221)

When this setting is on, the panel can be accessed from an off-site phone.

￿To turn Remote Access off or on:

1.With the display showing REMOTE ACCESS OFF/ON (current setting), press 1 (off) or 2 (on). The display flashes the entered setting.

2.Press # and the display shows the new setting.

Concord Ultra 34