GE 60-883-95R Option 30 Demo Mode, Option 31 Programming Report, Option 32 Supervisory Time

Option 30: Demo Mode		Range = On/Off (Default = Off)
Determines whether the panel operates as a demonstration model (on) or a	¾ To Add or Delete Demo Mode:
standard panel (off).	1.	Press Add or Delete.
Turning on this feature disables low battery supervision.	2.	Press Option #.
When a panic is pressed the panel will announce “Contacting emergency	3.	Press 3, then 0.
number. Please remain calm.” There will be a 10 second pause then the	4.	Press Done.
panel will say “This is the response center, we have received your alarm. Do
you have an emergency?”
Option 31: Programming Report		Range = On/Off (Default = Off)
Determines whether the panel sends a report to the central station anytime	¾ To Add or Delete Programming Report:
programming mode is entered/exited (on) or not at all (off).	1.	Press Add or Delete.
When Programming Report is on the panel sends a report whenever the	2.	Press Option #.
dealer (Utility 1) or installer (Utility 2) code is used to enter programming	3.	Press 3, then 1.
mode and again when the programming session ends. The report is also sent
when the Menu button on the back of the panel is used to enter add a sensor	4.	Press Done.
mode, and again when the sensor is added.
Option 32: Supervisory Time		Range = any time (Default = 12:00 A.M.)
Determines the time of day the panel reports supervisory conditions - sensor	¾ To program Supervisory Time:
failures, system low battery, sensor low battery and automatic phone tests to	1.	Press Add.
the central station. If Option 40 is On Medication Reminders will be	2.	Press Option #.
reported also.
Note	3.	Press 3, then 2.
The panel clock must be set to the correct time for this option and Option 14: Auto	4.	Enter the desired Supervisory Time using
Phone Test to work correctly.		the Hours and Minutes buttons.
	5.	Press Done.
Option 33: Modem Sensitivity		Range = On/Off (Default = Off)
Determines whether the modem sensitivity is set to normal (off) or high	¾ To Add or Delete Modem Sensitivity:
(on).	1.	Press Add or Delete.
Note	2.	Press Option #.
This feature should be used only if the panel experiences consistent trouble	3.	Press 3, then 3 again.
reporting to the central station. Otherwise, leave this option off.
	4.	Press Done.
Option 34: VOX Mic Gain		Range = 01-64 (Default = 14)
Sets the mic gain (sensitivity) when using voice-activated switching	¾ To program VOX Mic Gain:
(Speaker Phone).	1.	Press Add.
Room size, acoustics and furnishings where the panel is located will influ-	2.	Press Option #.
ence the setting. The available settings are 01 (low) to 64 (high). Entries	3.	Press 3, then 4.
must be 2 digits.
	4.	Enter the desired VOX Mic Gain using the
		numbered buttons.
	5.	Press Done.
Option 35: VOX Gain Range		Range = 01-64 (Default = 20)
Sets the gain range for the voice-activated switching (VOX). The available	¾ To program VOX Gain Range:
setting are 01 (low) to 64 (high). Entries must be 2 digits. For correct perfor-	1.	Press Add.
mance this option should be set equal to or greater than Option 34: VOX	2.	Press Option #.
Mic Gain.
Note	3.	Press 3, then 5.
This option works in conjunction with Option 34: VOX Mic Gain. It is important to	4.	Enter the desired VOX Gain Range using
follow the setting recommendations as described to achieve acceptable opera-		the numbered buttons.
tion.	5.	Press Done.

Programming Options 16