GE 60-883-95R Option 2 Account Number, Option 3 Primary Phone Number, Option 6 Call Waiting

Page 14

Option 2: Account Number

 

Range = 0-9, A-F (Default = 00000)

Lets you program (Add) up to a 10-character alphanumeric account number.

¾ To program an Account Number:

Use the numbered buttons to enter numbers. To enter a letter, press the 9 but-

1.

Press Add.

ton then use the Minutes + button to program letters A-F. Deleting this

2.

Press Option #.

option sets Account Number back to 00000.

Note

3.

Press 0, then 2.

If Option 10 or 11 are set to Contact ID do not use the letter A in an account num-

4.

Enter the Account Number.

ber.

5.

Press Done.

 

 

 

 

Option 3: Primary Phone Number

 

Range = 26 Digits (Default = Off)

 

 

Lets you program (Add) a central monitoring station receiver phone number

¾ To program a Primary Phone Number:

for monitored systems (up to 26 digits long). Deleting this option sets it to

1.

Press Add.

the default of Off.

2.

Press Option #.

When programming a Primary Phone Number use the Add button to enter a

3.

Press 0, then 3.

* symbol. Use the Delete button to enter a # symbol. Use the Test button to

enter a pause.

4.

Enter the Number using the numbered but-

Note

 

tons and the Add, Delete, and Test buttons

 

as necessary.

A primary phone number must be programmed for ETL (UL 1635) listed systems.

 

5.

Press Done.

 

 

 

 

Option 4: Secondary Phone Number

 

Range = 26 Digits (Default = Off)

 

 

Lets you program (Add) a central monitoring station receiver/numeric

¾ To program a Secondary Phone Number:

pager/voice event notification phone number (up to 26 digits long). Deleting

1.

Press Add.

this options sets it to the default of Off.

2.

Press Option #.

When programming a Secondary Phone Number use the Add button to enter

a * symbol. Use the Delete button to enter a # symbol. Use the Test button to

3.

Press 0, then 4.

enter a pause.

4.

Enter the Number using the numbered but-

 

 

tons and the Add, Delete, and Test buttons

 

 

as necessary.

 

5.

Press Done.

 

 

 

Option 5: Numeric Pager/Voice Event Notification Phone

 

Range = 26 Digits (Default = Off)

Number

 

 

Lets you program (Add) a phone number for numeric pager or voice event

¾ To program a Numeric Pager/Voice Event

notification (up to 26 digits long). Deleting this option turns it Off.

 

Notification Phone Number:

When programming a Numeric Pager/Voice Event Notification Phone Num-

1.

Press Add.

ber use the Add button to enter a * symbol. Use the Delete button to enter a #

2.

Press Option #.

symbol. Use the Test button to enter a pause.

3.

Press 0, then 5.

Note

4.

Enter the Number using the numbered but-

It may be necessary to enter up to 5 pauses after a pager phone number in order

 

tons and the Add, Delete, and Test buttons

for it to work properly.

 

If the CareGard panel fails to report to a numeric pager, try adding pauses one at

 

as necessary.

a time until the system reports to the pager.

5.

Press Done.

 

 

 

Option 6: Call Waiting

 

Range = 26 Digits (Default = Off)

 

 

Lets you program up to a 26-digit number or code that disables call waiting

¾ To program a Call Waiting code:

or any other phone service before dialing central station, pager or voice

1.

Press Add.

event notification phone number (on). When this option is turned off, the

2.

Press Option #.

panel dials only the central station or pager phone numbers.

 

3.

Press 0, then 6.

 

4.

Enter the Call Waiting code using the num-

 

 

bered buttons.

 

5.

Press Done.

 

 

 

9

Programming Options

Image 14
Contents CareGard GE Interlogix FCC Part 15 Information to the UserContents Adding/Replacing Sensors Activity CheckMedication Reminders Deleting Sensors System Monitoring Sensor Testing Phone Communication TestingTroubleshooting Central Station Reporting Special Installation RequirementsETL Listed Installations Control Panel Multi-Purpose PanicLine Seizure Locating the PanelPlugging in the Phone Line No Line SeizureAdjusting the Speaker Volume Plugging in the PowerPowering up the System To activate a portable panic sensorUtility Access Code 1 Dealer Code Access CodesMaster Access Code Utility Access Code 2 Installer CodeChanging an Access Code Entering Program ModeSetting the Clock ¾ To change an option setting Numbered Options Settings¾ To hear the current setting for each option Function Default Range Desired Setting¾ To turn Panel Voice On or Off Range = On/Off Default = OnOption 1 Panel Voice Option 4 Secondary Phone Number Option 2 Account NumberOption 3 Primary Phone Number Option 5 Numeric Pager/Voice Event Notification PhoneOption 8 Phone Lock Phone Mod 1 SettingsOption 7 Downloader Phone Number Option 9 Downloader CodeOption 11 Phone Mod Phone Mod 2 SettingsPhone Mod 3 Settings Option 12 Numeric Pager/Voice Event Notification PhoneOption 13 Dtmf Dialing Option 15 RF TimeoutOption 17 AC Power Failure Report Option 14 Auto Phone TestRing/Hang/Ring Settings Option 18 CPU Low Battery ReportRange = On/Off Default = Option 19 Fail to CommunicateOption 26 AVM Mode Option 21 Call Button EnableOption 22 Downloader Enable Option 23 300 BaudAccess Code Length Defaults Option 28 Access Code LengthRange = 3-6 Default = Option 27 RF Jam DetectOption 32 Supervisory Time Option 30 Demo ModeOption 31 Programming Report Option 33 Modem SensitivityOption 36 Manual Mic Gain Option 38 Alarm Cancel TimeoutOption 39 No Audio on Alarm Cancel Option 37 VOX Receiver GainUsing CareGard with Activity Check Set Exiting Programming ModeResetting Memory to Defaults Option 42 Siren Time OutAcknowledging Medication Reminders Setting up Medication RemindersHome and Away Programming Sensors Adding Replacing SensorsSupervised vs. Not Supervised Sensor Type To ProgramDoor/Window Sensor type possibilities Sensor Type To Trip Sensor Type Options Deleting Sensors AC PowerBackup Battery System¾ To replace the backup battery Sensor Low BatteryReplacing the Backup Battery Sensor Supervisory FailurePhone Test Sensor TestingAutomatic Phone Test Central Station CommunicationRemote Phone Operation Pager CommunicationVoice Event Notification Pager Reporting MessageSystem Function Phone Command Remote Phone OperationTroubleshooting Guide Problem SolutionIndex Numerics