GE 60-883-95R Special Installation Requirements, ETL Listed Installations

Page 6

About this Manual

This manual provides advanced information for planning, installing programming, operating, and testing a CareGard system. Complete operation instructions are available in the CareGard User Instructions (Part No. 466-1936).

Special Installation Requirements

This system is designed to be used as an emergency notification system. Some installations may require configurations dictated by city or state codes, or insurance.

ETL Listed Installations

The following are requirements for ETL listed installations:

Basic System

•Control Panel

•Backup Battery

•Standard Class II 9 VAC 700 mA Power Transformer

•Wrist Panic

Digital Alarm Communicator System (UL 1635)

These options are required only if the system is set up for central station reporting.

•Option 3: Primary Phone Number programmed

•Option 10: Phone Mod 1 set to 0 or 1

•Option 14: Auto Phone Test set to 001

•Option 15: RF Timeout set to 4 hours

•Option 17: AC Power Failure Report set to 15 minutes

•Option 18: CPU Low Battery Report set to on

•Option 27: RF Jam Detect set to on

Home Health Care Signaling Equipment (UL 1637)

•Basic System

•Panic Sensor

Central Station Reporting

The panel has been tested with the following central station receivers using SIA and Contact ID reporting formats:

•Radionics D6600 Central Station Receiver

•Sur-Gard Central Station Receiver with models SG-DRL2A and SG-CPM2

1	About this Manual

Image 6

Contents CareGard GE Interlogix FCC Part 15 Information to the UserContents Activity Check Medication RemindersAdding/Replacing Sensors Sensor Testing Phone Communication Testing TroubleshootingDeleting Sensors System Monitoring Special Installation Requirements ETL Listed InstallationsCentral Station Reporting Control Panel Multi-Purpose PanicLine Seizure Locating the PanelPlugging in the Phone Line No Line SeizureAdjusting the Speaker Volume Plugging in the PowerPowering up the System To activate a portable panic sensorUtility Access Code 1 Dealer Code Access CodesMaster Access Code Utility Access Code 2 Installer CodeEntering Program Mode Setting the ClockChanging an Access Code ¾ To change an option setting Numbered Options Settings¾ To hear the current setting for each option Function Default Range Desired SettingRange = On/Off Default = On Option 1 Panel Voice¾ To turn Panel Voice On or Off Option 4 Secondary Phone Number Option 2 Account NumberOption 3 Primary Phone Number Option 5 Numeric Pager/Voice Event Notification PhoneOption 8 Phone Lock Phone Mod 1 SettingsOption 7 Downloader Phone Number Option 9 Downloader CodeOption 11 Phone Mod Phone Mod 2 SettingsPhone Mod 3 Settings Option 12 Numeric Pager/Voice Event Notification PhoneOption 13 Dtmf Dialing Option 15 RF TimeoutOption 17 AC Power Failure Report Option 14 Auto Phone TestRing/Hang/Ring Settings Option 18 CPU Low Battery ReportRange = On/Off Default = Option 19 Fail to CommunicateOption 26 AVM Mode Option 21 Call Button EnableOption 22 Downloader Enable Option 23 300 BaudAccess Code Length Defaults Option 28 Access Code LengthRange = 3-6 Default = Option 27 RF Jam DetectOption 32 Supervisory Time Option 30 Demo ModeOption 31 Programming Report Option 33 Modem SensitivityOption 36 Manual Mic Gain Option 38 Alarm Cancel TimeoutOption 39 No Audio on Alarm Cancel Option 37 VOX Receiver GainUsing CareGard with Activity Check Set Exiting Programming ModeResetting Memory to Defaults Option 42 Siren Time OutSetting up Medication Reminders Home and AwayAcknowledging Medication Reminders Programming Sensors Adding Replacing SensorsSupervised vs. Not Supervised Sensor Type To ProgramDoor/Window Sensor type possibilities Sensor Type To Trip Sensor Type Options Deleting Sensors AC PowerBackup Battery System¾ To replace the backup battery Sensor Low BatteryReplacing the Backup Battery Sensor Supervisory FailurePhone Test Sensor TestingAutomatic Phone Test Central Station CommunicationRemote Phone Operation Pager CommunicationVoice Event Notification Pager Reporting MessageSystem Function Phone Command Remote Phone OperationTroubleshooting Guide Problem SolutionIndex Numerics