GE 60-883-95R Option 13 Dtmf Dialing, Option 14 Auto Phone Test, Option 15 RF Timeout

Page 17

Option 13: DTMF Dialing

 

Range = On/Off (Default = On)

Determines whether the panel uses DTMF (on) or pulse (off) for dialing pro-

¾ To Add or Delete DTMF Dialing:

grammed phone numbers.

1.

Press Add or Delete.

 

2.

Press Option #.

 

3.

Press 1, then 3.

 

4.

Press Done.

 

 

Option 14: Auto Phone Test

Range = Off, 001-254 days (Default = Off)

 

 

Determines whether the panel automatically performs a periodic phone test.

¾ To program Auto Phone Test:

The test interval can be from 001 to 254 days. Entries must be 3 digits. The

1.

Press Add.

time of day the panel performs the test is determined by Option 32: Supervi-

2.

Press Option #.

sory Time, which must be turned on for this feature to work.

3.

Press 1, then 4.

Note

4.

Enter the desired Auto Phone Test days

Auto Phone Test must be set to 001 for ETL (UL 1635) listed systems.

 

using the numbered buttons.

 

 

 

5.

Press Done.

 

 

Option 15: RF Timeout

Range = 02-24 hours (Default = 12 hours)

 

 

Determines the time period within which the panel must receive at least one

¾ To program Auto Phone Test:

supervisory signal from a learned sensor before identifying a sensor failure

1.

Press Add.

for that sensor and sounding trouble beeps. Any sensor failure is reported

2.

Press Option #.

immediately and again at the supervisory time (Option 32: Supervisory

Time). See “Sensor Supervisory Failure” in the System Operation section

3.

Press 1, then 4.

for more information.

4.

Enter the desired Auto Phone Test days

The Timeout can be set from 02 to 24 hours. Entries must be 2 digits.

 

using the numbered buttons.

Note

5.

Press Done.

Setting this feature to 2 hours may cause false reports.

 

 

RF Timeout must be set to 4 hours for ETL (UL 1635) listed systems.

 

 

 

 

 

Option 16: Manual Phone Test

 

Range = On/Off (Default = On)

 

 

Determines whether the user can perform a manual phone test to verify com-

¾ To Add or Delete Manual Phone Test:

munication to a central station/pager (on), or not (off).

1.

Press Add or Delete.

 

2.

Press Option #.

 

3.

Press 1, then 6.

 

4.

Press Done.

 

 

Option 17: AC Power Failure Report

Range = Off, 0-254 Min (Default = 60 Min)

 

 

Determines whether the panel sends AC Power failure reports to a central

¾ To program an AC Power Failure Report

station or pager after the programmed time period expires (on), or not (off).

 

Time:

After 30 seconds without AC Power the panel lights turn off. When the

1.

Press Add.

panel is without AC Power for the programmed time, an AC power failure is

2.

Press Option #.

reported. The AC Power Failure Report time period can be set from 5 to 254

3.

Press 1, then 7.

minutes. Entries must be 3 digits. The panel reports an AC power restoral

4.

Enter the desired AC Power Failure Report

when AC power returns to the panel.

Note

 

Time in minutes using the numbered but-

 

tons.

AC Power Failure Report must be set to 15 minutes for ETL listed systems.

 

5.

Press Done.

 

 

 

 

Programming Options

12

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CareGard FCC Part 15 Information to the User GE InterlogixContents Adding/Replacing Sensors Activity CheckMedication Reminders Deleting Sensors System Monitoring Sensor Testing Phone Communication TestingTroubleshooting Central Station Reporting Special Installation RequirementsETL Listed Installations Multi-Purpose Panic Control PanelPlugging in the Phone Line Locating the PanelLine Seizure No Line SeizurePowering up the System Plugging in the PowerAdjusting the Speaker Volume To activate a portable panic sensorMaster Access Code Access CodesUtility Access Code 1 Dealer Code Utility Access Code 2 Installer CodeChanging an Access Code Entering Program ModeSetting the Clock ¾ To hear the current setting for each option Numbered Options Settings¾ To change an option setting Function Default Range Desired Setting¾ To turn Panel Voice On or Off Range = On/Off Default = OnOption 1 Panel Voice Option 3 Primary Phone Number Option 2 Account NumberOption 4 Secondary Phone Number Option 5 Numeric Pager/Voice Event Notification PhoneOption 7 Downloader Phone Number Phone Mod 1 SettingsOption 8 Phone Lock Option 9 Downloader CodePhone Mod 3 Settings Phone Mod 2 SettingsOption 11 Phone Mod Option 12 Numeric Pager/Voice Event Notification PhoneOption 17 AC Power Failure Report Option 15 RF TimeoutOption 13 Dtmf Dialing Option 14 Auto Phone TestRange = On/Off Default = Option 18 CPU Low Battery ReportRing/Hang/Ring Settings Option 19 Fail to CommunicateOption 22 Downloader Enable Option 21 Call Button EnableOption 26 AVM Mode Option 23 300 BaudRange = 3-6 Default = Option 28 Access Code LengthAccess Code Length Defaults Option 27 RF Jam DetectOption 31 Programming Report Option 30 Demo ModeOption 32 Supervisory Time Option 33 Modem SensitivityOption 39 No Audio on Alarm Cancel Option 38 Alarm Cancel TimeoutOption 36 Manual Mic Gain Option 37 VOX Receiver GainResetting Memory to Defaults Exiting Programming ModeUsing CareGard with Activity Check Set Option 42 Siren Time OutAcknowledging Medication Reminders Setting up Medication RemindersHome and Away Supervised vs. Not Supervised Adding Replacing SensorsProgramming Sensors Sensor Type To ProgramDoor/Window Sensor type possibilities Sensor Type To Trip Sensor Type Options Backup Battery AC PowerDeleting Sensors SystemReplacing the Backup Battery Sensor Low Battery¾ To replace the backup battery Sensor Supervisory FailureAutomatic Phone Test Sensor TestingPhone Test Central Station CommunicationVoice Event Notification Pager CommunicationRemote Phone Operation Pager Reporting MessageRemote Phone Operation System Function Phone CommandProblem Solution Troubleshooting GuideNumerics Index
Top Page Image Contents