Paradyne manual Model 3830 S-Registers S6  Blind Dial Pause, S7  No Answer Timeout

COMSPHERE 3800 Series Modems ± Model 3830

Table 4-3

(3 of 20)

Model 3830 S-Registers

S6  Blind Dial Pause

Determines how long (in seconds) the modem waits after going off-hook before dialing a telephone number if using result code X0, X1, or X3.

Enter a value from 2±255 seconds.

Factory setting is 2 seconds.

S7  No Answer Timeout

Determines how long (in seconds) an originating modem waits before abandoning a call when no answer tone is received.

Enter a value from 1±255 seconds.

Factory setting is 45 seconds.

S8  ``,º Pause Time for the Dial Modifier

Determines how long (in seconds) the modem pauses when it encounters a comma (,) in the Dial command string.

Enter a value from 0±255 seconds.

Factory setting is 2 seconds.

S10  No Carrier Disconnect

Determines how long (in tenths of seconds) the modem allows the carrier signal to be Off before disconnecting the call.

Enter a value from 0±254 in 0.1 second increments. (A value of 255 disables this register.)

Factory setting is 20 (2 seconds).

S12  Escape Guard Time

Sets the value (in 20-millisecond increments) for the required pause before and after the escape sequence is issued. The guard time prevents the modem from interpreting data as the escape sequence characters.

Enter a value from 0±255 in 20-millisecond increments. For example, the factory setting of 50 equals 1000 milliseconds or one second. Factory setting is 50 (1 second).

4-32 August 1998 3830-A2-GB91-30