COMSPHERE 3800 Series Modems ± Model 3830

Table 4-3

(11 of 20)

Model 3830 S-Registers

S52 DTE Local Loopback (CT141)

Determines if the modem performs a local analog loopback if it receives a CT141 signal from the DTE.

Register has the following values:

0 = Disable

1 = Enable

Factory setting is Disable.

S53 V.54 Address

Identifies the address of the modem to be placed in a loopback test. Register has the following values:

0 = Disable

1±34 = Modem address Factory setting is Disable.

S54 V.54 Device Type

Identifies where the modem is physically located in the network. Register has the following values:

0 = Peripheral

1 = Intermediate

Factory setting is Peripheral.

S55 Access from Remote

Determines whether the 3830 modem's configuration options can be accessed by a remote 3800 Series modem via a dial-line or leased-line connection.

0 = Enable

1 = Disable

Factory default is Enable.

S56 Remote Access Password

Register allows entry of the first pair (leftmost) of digits of a remote access password. Any value from 00 to 99 is valid. For example, if the remote access password is 12345678, then S56=12.

4-40

August 1998

3830-A2-GB91-30

Page 76
Image 76
Paradyne manual Model 3830 S-Registers S52  DTE Local Loopback CT141, S53  V.54 Address, S54  V.54 Device Type