
4. AT Command Set and
Table
(19 of 23)
Model 3830 AT Commands
\Kn Buffer Control, Send Break Control, Break Forces Escape The \Kn command sets three configuration options simultaneously:
| Break | Send | Break |
| Buffer | Break | Forces |
| Control | Control | Escape |
|
|
|
|
\K0 | Discard Data | Break First | Enable |
\K1 | Discard Data | Break First | Disable |
\K2 | Keep Data | Break First | Enable |
\K3 | Keep Data | Break First | Disable |
\K4 | Keep Data | Data First | Enable |
\K5 | Keep Data | Data First | Disable |
\K6 | Discard Break | Not Applic. | Disable |
|
|
|
|
BREAK BUFFER CONTROL
Determines if data stored in the modem's buffer is saved or discarded when the DTE issues a break sequence.
SEND BREAK CONTROL
Determines what is sent from the modem first, data or break if a break sequence is sent from the DTE.
BREAK FORCES ESCAPE
Determines whether or not the modem should enter Command mode when it receives a break character from the DTE.
August 1998 |