4. AT Command Set and S-Registers

Table 4-3

(14 of 20)

Model 3830 S-Registers

S65 Line Current Disconnect

Determines if the modem disconnects if an interruption in loop current greater than 8 milliseconds or 90 milliseconds occurs.

Register has the following values:

0 = Enable (8 msec)

1 = Enable (90 msec)

2 = Disable

Factory setting is Enable (8msec).

S66 NMS Call Messages

Register determines if the modem sends information regarding status (Call Progress) and/or sends summarized call statistics (Call Connect) to the network management system (COMSPHERE 6700 Series NMS).

Register has the following values:

0 = Call Connect & Progress

1 = Disable

2 = Call Connect Only

3 = Call Progress Only

Factory setting is Call Connect & Progress.

S67 Directory Location 1 Callback

Determines if the modem uses the single number callback function.

Register has the following values:

0 = Disable

1 = Enable

Factory setting is Disable.

3830-A2-GB91-30

August 1998

4-43

Page 79
Image 79
Paradyne manual Model 3830 S-Registers S65  Line Current Disconnect, S66  NMS Call Messages