4. AT Command Set and S-Registers

Table 4-2

(23 of 23)

Model 3830 AT Commands

%Cn MNP5 Data Compression

Determines if the modem uses MNP Class 5 data compression. It can be set independently of V.42bis data compression. Online changes do not take effect until a disconnect occurs.

%C0 Disable.

%C1 Enable.

%Rn DTE Rate

Sets the rate at which data is passed between the modem and the DTE.

%R must be the last command on the command line. Setting the DTE rate with the %R command does not turn off autobauding.

%R115200 Sets the DTE rate to 115,200 bps.

%R76800 Sets the DTE rate to 76,800 bps.

%R57600 Sets the DTE rate to 57,600 bps.

%R38400 Sets the DTE rate to 38,400 bps.

%R19200 Sets the DTE rate to 19,200 bps.

%R14400 Sets the DTE rate to 14,400 bps.

%R9600 Sets the DTE rate to 9600 bps.

%R7200 Sets the DTE rate to 7200 bps.

%R4800 Sets the DTE rate to 4800 bps.

%R2400 Sets the DTE rate to 2400 bps.

%R1200 Sets the DTE rate to 1200 bps.

%R300 Sets the DTE rate to 300 bps.

Hn V.42bis Compression

Enables or disables V.42bis data compression.

H0 Disable.

H1 Transmit only.

H2 Receive only.

H3 Enable.

3830-A2-GB91-30

August 1998

4-29

Page 65
Image 65
Paradyne manual Model 3830 AT Commands Cn  MNP5 Data Compression, Rn  DTE Rate, ″ Hn  V.42bis Compression