Paradyne manual Register List, Model 3830 S-Registers S0  Auto-Answer Ring Number

COMSPHERE 3800 Series Modems ± Model 3830

S-Register List

S-Registers affect the operating parameters of the Model 3830 modem. These registers are applicable only when the DTE Dialer Type configuration option is set for AT. (See &Mn and &Qn commands.)

S-Registers can be displayed and/or modified when the modem is in Command mode. To display the value of an S-Register, issue the following command:

TYPE: ATSn?

Where: n is the register number.

PRESS: Enter

To modify the value of an S-Register, issue the following command:

TYPE: ATSn=r

Where: n is the register number, and r is the new value.

PRESS: Enter

Table 4-3lists all S-Registers supported by the Model 3830.

Table 4-3

(1 of 20)

Model 3830 S-Registers

S0  Auto-Answer Ring Number

Determines the number of rings the modem will count before automatically answering a call.

Enter zero (0) if you do not want the modem to automatically answer any calls. Otherwise, enter a value from 1±255 for the number of rings to count before answering. Note that if disabled, the modem can only answer with an ATA command.

Factory setting is 1.

4-30 August 1998 3830-A2-GB91-30