COMSPHERE 3800 Series Modems ± Model 3830

Table 4-3

(15 of 20)

Model 3830 S-Registers

S69 Make Busy Via DTR

Determines if the modem goes off-hook (busy) when DTR is Off.

Register has the following values:

0 = Disable

1 = Enable

Factory setting is Disable.

S74 Network Position Identification

Register identifies each modem as either a control or tributary modem. Register has the following values:

0 = Tributary

1 = Control

Factory setting is Tributary.

S75 Network Management Address

Register determines the modem's network address. This address is used when accessing the modem from the NMS.

Enter a value from 0 (network address 001) to 255 (network address 256).

Factory setting is 255.

S76 V.32bis Autorate (Dial Line)

Determines if the Autorate function is used on dial lines when connected in V.32bis mode. Autorate allows the modem to adjust line speed due to noise.

Register has the following values:

0 = Enable

1 = Disable

2 = Start at 4800 bps

3 = Start at 9600 bps

Factory setting is Enable.

4-44

August 1998

3830-A2-GB91-30

Page 80
Image 80
Paradyne manual Model 3830 S-Registers S69  Make Busy Via DTR, S74  Network Position Identification