Paradyne 3830 Wire Leased-Line Connection, Telephone Connection, AC Power Transformer Connection

2. Model 3830 Modem Installation

2-Wire Leased-Line Connection

Use the following procedures to connect a Model 3830 modem to the

6-pin, center pair, leased-line network interface. (For 2-wire leased line connection to a JM8 network interface, refer to Appendix C, Pin Assignments.)

1.Insert the 6-position, 4-conductor modular plug into the jack labeled LINE, Figure 2-1.

2.Insert the other end of the modular cord into the leased-line network interface.

Telephone Connection

Use the following procedures to connect the modem to a telephone:

1.Insert the 6-position, 4-conductor modular plug into the jack labeled PHONE.

2.Insert the other end of the modular cord into the telephone.

AC Power Transformer Connection

Use the following procedures to connect the modem to an ac power outlet:

1.Make sure the modem's power switch is in the Off position.

2.Insert the power transformer's 5-pin DIN male connector into the modem's rear panel ac power receptacle (Figure 2-1).

3.For the 115V power transformer, insert the power transformer into a grounded ac power outlet.

For the 220±240V power transformer, insert the line cord's outlet connector into the power transformer's IEC 320 power outlet. Next, insert the line cord wall plug into the appropriate grounded ac outlet.

3830-A2-GB91-30 August 1998 2-5