3Com 3CR990SVR97, 3CR990-TX-97, 3CR990-TX-95 manual Receive timeout, Retry count, Send timeout

110CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS

Syntax	lbrsl probe interval seconds
	where seconds is the interval in seconds.
Example	lbrsl set probe interval 1
Default	1 second
	If the delay is longer than 1 second, NIC or link failures
	are not recognized as quickly.

receive timeout

This command sets the receive timeout individually for each group and displays a message for each loaded frame type.

Syntax lbrsl receive timeout pri_slot seconds

where:

pri_slot is the PCI slot number of the primary NIC.

seconds is the time in seconds

Example lbrsl receive timeout 10001 1

Default 1 second

retry count

This command sets the number of retries that the software attempts when a probe packet fails to appear at the receive end. After the retries, the software puts the board in Wait mode. If no argument is specified or the specified argument is invalid, the current value is displayed. Otherwise, the new value is displayed.

Syntax lbrsl retry count number_of_retries

where:

number_of_retries is any positive integer

Example lbrsl retry count 2

Default 5

send timeout

This command sets the timeout value, in seconds, that the software waits before retransmitting a probe packet when a send request to the link support layer (LSL) is not acknowledged. A message is displayed for each loaded frame type.