3Com 3CR990SVR95, 3CR990-TX-97, 3CR990-TX-95, 3CR990SVR97 manual 107

Maintaining Groups 107

server links, use the LB option. To specify a resilient server link group without load balancing, use the RSL option.

For the LBRSL GROUP command syntax, see Server Feature Commands on page 108.

3Reboot the server.

The sample AUTOEXEC.NCF file in Figure 8 shows one group of three NICs and one group of two NICs. The primary NIC in slot 10001 is bound to two secondary NICs in slot 10002 and slot 10003. The primary NIC in slot 10004 is bound to the secondary NIC in slot 10005.

Figure 8 AUTOEXEC.NCF File for Two Groups of NICs

load se load lbrsl

;Define Group 1 primary NIC slot-frame instances

load 3c990 slot=10001 frame=ethernet_802.2 name=p1_802.2 load 3c990 slot=10001 frame=ethernet_ii name=p1_ii

;Define Group 1 secondary NIC slot-frame instances

load 3c990 slot=10002 frame=ethernet_802.2 name=p2_802.2 load 3c990 slot=10002 frame=ethernet_ii name=p2_ii load 3c990 slot=10003 frame=ethernet_802.2 name=p3_802.2 load 3c990 slot=10003 frame=ethernet_ii name=p3_ii

;Define Group 2 primary NIC slot-frame instances

load 3c990 slot=10004 frame=ethernet_802.2 name=p4_802.2 load 3c990 slot=10004 frame=ethernet_ii name=p4_ii

;Define Group 2 secondary NIC slot-frame instances

load 3c990 slot=10005 frame=ethernet_802.2 name=p5_802.2 load 3c990 slot=10005 frame=ethernet_ii name=p5_ii

;Bind protocols to primary NICs bind ipx to p1_802.2 net=FF02

bind ip to p1_ii address=192.1.1.1 mask=ff.ff.ff.00 bind ipx to p4_802.2 net=FF04

bind ip to p4_ii address=192.1.2.1 mask=ff.ff.ff.00

;Create Group 1 with NIC 10001 primary ;and NICs 10002 and 10003 secondary lbrsl group lb 10001 10002 10003

;Create Group 2 with NIC 10004 primary ;and NIC 10005 secondary

lbrsl group lb 10004 10005

;To create resilient server link groups without load balancing ;use the rsl option:

;lbrsl group rsl 10001 10002 10003 ;lbrsl group rsl 10004 10005