3Com 3CR990SVR95, 3CR990-TX-97 manual Creating the Filter Action, Binding the Filter Action

Creating a Security Policy 127

Binding the Filter

This sequence attaches the new filter to the policy.

The IP Filter List screen appears.

1Enable the option for the new filter name and make sure that the new filter name is selected.

2Click Next.

Creating the Filter Action

This sequence defines how the filter acts on the policy. The Filter Action screen appears.

1Click Add.

The Filter Action Wizard starts.

2Click Next.

The Filter Action Name screen appears.

3Enter a name (for example: 3DES to the Server), and then click Next.

The Filter Action General Options screen appears.

4Accept the default, and then click Next.

The screen, Communicating with computers that do not support IPsec, appears.

5Accept the default value, and then click Next. The IP Traffic Security screen appears.

6Select Custom and then click Settings.

The Custom Security Method Settings screen appears.

7Enable the Data integrity and encryption (ESP): check box, and then make the appropriate selections in the Integrity and algorithms list boxes.

8Click OK, Next, and then Finish.

Binding the Filter Action

This sequence attaches the new filter action to the filter and policy.