3Com 3CR990SVR95, 3CR990-TX-97, 3CR990-TX-95, 3CR990SVR97 manual Ungroup, Wait timeout

Maintaining Groups 111

Syntax lbrsl send timeout pri_slot seconds

where:

pri_slot is the PCI slot number of the primary NIC.

seconds is the time in seconds.

Example lbrsl send timeout 1001 10

Default 10

ungroup

This command deletes a group. The LAN driver for the group must not be loaded. The following message appears for all frame types that the NIC supports:

Cleaning up resources for group associated with Primary Slot #xxxx.

Syntax lbrsl ungroup pri_slot

where:

pri_slot is the PCI slot number of the primary NIC.

Example lbrsl ungroup 10001

Default None

wait timeout

This command sets the timeout value, in seconds, that the software waits before marking a NIC that is in wait mode as failed (see retry count). If no argument is specified or if the specified argument is invalid, the current value is displayed. Otherwise, the new value is displayed.

Syntax lbrsl wait timeout seconds

where:

seconds is any positive integer.

Example lbrsl wait timeout 2

Default 1