3Com 3CR990-TX-97, 3CR990-TX-95 manual Loading the 3Com EtherCD, Press Enter to select the driver

96CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS

Loading the 3Com EtherCD

NetWare 4.11 Insert the CD in the CD-ROM drive and enter these commands:

load cdrom

cd mount 3C99XC_TXM

NetWare 5.0 Insert the CD in the CD-ROM drive and enter this command:

load cdrom

Wait for the message that states the CD is mounted successfully, and then proceed to copy the driver.

Copying the Driver

1Enter this command at the prompt: NetWare 4.11: load install

NetWare 5.0: load nwconfig

2In the Configuration Options screen, select Driver options.

3In the Driver Options screen, select Configure network drivers.

4In the Additional Driver Actions screen, select Select a driver.

The Select a Driver screen appears, listing all previously saved drivers in the system.

If this is the first installation of the 3Com server NIC driver, it does not appear in this list.

5Press Insert.

A system message for selecting a disk drive appears.

6Press F3.

7Enter a path to the volume that contains the driver. For example:

3C99XC_TXM:\nwserver

The Select a Driver to Install screen appears with the 3Com EtherLink Server NIC driver name highlighted.

8Press Enter to select the driver.