3Com 3CR990-TX-97, 3CR990-TX-95, 3CR990SVR97, 3CR990SVR95 manual Click Yes to restart your computer

44CHAPTER 3: INSTALLING NIC DRIVERS IN WINDOWS

4Select the CD-ROM drive option and clear any other check options that are selected.

5Insert the EtherCD in the CD-ROM drive, and then click Next.

Windows finds the driver file for the device.

6Click Next. Files are copied.

The Insert Disk screen appears, prompting you for the Windows 98 CD-ROM.

7Click OK.

The Copying Files dialog box appears.

8Remove the EtherCD from the CD-ROM drive, insert the Windows 98 CD, enter the path to the CD-ROM drive, and click OK.

The Add New Hardware Wizard displays a message informing you that Windows has finished installing the software.

9Click Finish.

The Systems Settings Change screen appears, prompting you to restart your computer.

10Click Yes to restart your computer.

You must restart your computer to complete the installation.

The software installation is complete. Go to Verifying Successful Installation on page 48 to confirm that the NIC is properly installed.

Windows 95

This section describes how to install the network driver and NIC software in a PC client or server running Windows 95.

CAUTION: Do not install a 3CR990 NIC while installing Windows 95 OSR2 using the “Custom” option. Install Windows 95 OSR2 first, then install the 3CR990 NIC.