3Com 3CR990-TX-97, 3CR990-TX-95, 3CR990SVR97 manual Installing Dynamicaccess Software in Windows

84CHAPTER 4: INSTALLING DYNAMICACCESS SOFTWARE IN WINDOWS

13Verify that the displayed components are correct for installation on your computer and click Next.

The system copies files from the EtherCD to the destination location, sets up the registry, builds drivers, and updates bindings.

After you have successfully installed the DynamicAccess LAN Encryption client, the physical adapters (NICs) and upper level protocols (TCP/IP, IPX, etc.) in your computer bind to the virtual adapters created by the DynamicAccess LAN Encryption software. The bindings of the upper level protocols to the physical adapters are removed and replaced with bindings to the virtual adapters.

Follow the rest of the setup wizard instructions to install the software properly.

If you see “version conflict” messages, click Cancel to continue.

When prompted to reboot, click Yes to continue.

If you see “Winsock 2 setup” error messages, reboot the system and re-start the 3Com LAN Encryption installation.

If prompted to insert the Windows 98 CD, insert it so that certain Windows files can be copied. (Prompting for the Windows CD depends on your PC configuration.) Follow the displayed prompts.

The setup program continues once the appropriate Windows files have been located and copied to the appropriate Windows folders.

The Setup Complete dialog box appears.

14Select Yes, I want to restart my computer now and click Finish to restart your computer.

If you have not yet created one or more connection profiles, you will be prompted to use the DynamicAccess LAN Client dialog box to create the profiles. See the “Creating a Connection Profile” topic in the administrator’s guide for more information.