3Com 3CR990SVR95 Press Enter to save the changes, Press Esc to Exit, Select Reinitialize System

Installing and Configuring the NetWare Server Driver 95

■Select the board. For example, enter: 3c99x_1, and then press Enter.

16When prompted, enter the network number, and then press Enter.

17In the Frame Type field, press Enter to display a list of frames, choose a frame, and press Enter.

18Press Esc.

You are prompted to save the changes.

19Press Enter to save the changes.

The configured Protocol to Network Interface Bindings screen appears.

20Press Esc to Exit.

The main menu appears.

■NetWare 4.11: Restart the server.

■NetWare 5.0:

■Select Reinitialize System.

■Press Enter to reinitialize.

Press Esc to exit from the program.

Installing the Server Driver and DynamicAccess Technology Using AUTOEXEC.NCF

You can also install the server driver by editing (or adding new) LOAD commands in the AUTOEXEC.NCF file.

With NetWare installed and the server up and running, complete the following steps to install and configure the driver and DynamicAccess technology server features on a NetWare file server.

In NetWare screens, use the arrow keys to select an item and then press Enter.