3Com 3CR990SVR95, 3CR990SVR97 Click Finish, Enter the path to the CD-ROM drive, and then click OK

Installing the Network Driver Using the EtherCD 47

2Click Finish.

■If networking has already been installed on your PC, go to step 4.

■If this is the first time that networking is being installed on your PC, the Identification tab of the Network screen appears. Go to step 3.

3In the specified fields of the Identification tab screen, enter the following information, and then click Close.

■Computer Name—Identifies the PC on the network for other users. This entry must be a unique name of 15 characters or fewer, containing no spaces.

■Workgroup—Identifies the group (for example, your department name) to which your PC belongs. If your computer is connected to a peer-to-peer network, this entry must be exactly the same for all the PCs in your network.

■Computer Description—Displays additional details to other users on the network about this PC. For example, you could specify that the PC is connected to a printer. Filling in this field is optional.

4The Insert Disk screen appears, prompting you for the EtherCD. Click OK.

The Copying Files screen appears.

5Enter the path to the CD-ROM drive, and then click OK.

Files are copied. The Insert Disk screen appears, prompting you for the Windows 95 CD-ROM.

6Click OK.

The Copying Files screen appears.

7Do one of the following:

■If the Windows 95 files were not copied to your hard drive, remove the EtherCD from the CD-ROM drive, insert the Windows 95 CD, enter the path to the CD-ROM drive, and then click OK.