3Com 3CR990-TX-95, 3CR990-TX-97, 3CR990SVR97 manual Specifying the Slot Number, Loading the Driver

Installing and Configuring the NetWare Server Driver 97

9Select Yes at the prompt to confirm the name of the driver to copy.

The installation program copies the driver to the appropriate server subdirectory. The Configuration screen appears.

Specifying the Slot Number

You need not specify the slot number if you are installing only one NIC.

1In the Configuration screen, select Slot Number.

2Enter the slot number of the NIC that you want to install. For example:

10001

See Changing NetWare Driver Configuration Parameters on page 103 for instructions on changing other parameters in this screen.

Loading the Driver

1Select Save parameters and load driver.

The installation program loads the configured driver and then writes the appropriate LOAD and BIND commands to the AUTOEXEC.NCF file.

The system assigns a network number.

2Enter a network number, or press Enter to select the system-assigned number.

If no errors are encountered, the installation program asks whether you want to select an additional network driver.

3Select Yes to set up another NIC.

Setting Up Another NIC

1Follow the prompts for another NIC:

■Select the driver

■Enter the slot number

■Save parameters and load the driver

2Repeat the process for all NICs to be set up.

3After all NICs are set up, press Esc several times to return to the Installation Options screen.