Configuring Groups and VLANs for a Server NIC

65

3Double-click the DynamicAccess SW Server icon.

The DynamicAccess Resilient Server Link/Load Balance/VLAN Configuration window appears. Click the appropriate tab to configure server features.

Creating a Group

1Click the Load Balance/RSL tab.

2In the Load Balance/RSL window, click Create Group.

3In the Create Group dialog box, type a group name.

4Set the load balancing:

To enable transmit load balancing—Clear the Receive Load Balance Enabled check box and check the Transmit Load Balance Enabled box.

To enable bidirectional load balancing—Check both the Transmit Load Balance Enabled box and the Receive Load Balance Enabled box. Enter only the Host ID bytes required for a dedicated IP address. For example:

 

Byte 1

Byte 2

Byte 3

 

Byte 4

 

 

 

 

 

Class A

Network ID

 

Host ID

 

 

 

 

 

 

 

 

24

1

 

253

 

 

 

 

 

 

Class B

Network ID

 

Host ID

 

 

 

 

 

 

 

 

2

 

253

 

 

 

 

 

 

Class C

 

Network ID

 

 

Host ID

 

 

 

 

 

 

 

 

 

 

 

253

 

 

 

 

 

 

See Specifying a Dedicated IP Address on page 66 for more information on the dedicated IP address.

To disable all load balancing—Clear the

Receive Load Balance Enabled and the

Transmit Load Balance Enabled check boxes.

5Click OK.

The name of the new NIC group appears in the Load Balancing/RSL Groups list box.

Page 64 Page 66
Page 65
Image 65
3Com 3CR990-TX-95 Creating a Group, Double-click the DynamicAccess SW Server icon, To disable all load balancing-Clear
Page 64 Page 66
Top Page Image Contents