Asante Technologies IC36240 Vlan Port Membership Modes, Static Access, Trunk Ieee 802.1q

7.2 VLAN Port Membership Modes

Assign a switchport to a VLAN by designating a membership mode. The membership mode determines the type of traffic the port carries and the number of VLANs that belong to a specific port. The following is a list of the membership modes:

•Static Access

•Trunk (IEEE 802.1Q)

7.2.1 Static Access

A static-access port can belong to one VLAN and is manually assigned to that VLAN. Use the following commands, beginning in config mode, to assign a static-access port to a VLAN:

Command	Purpose
interface IFNAME	Enter the interface name to access the interface configuration mode.
Switchport mode access	This command designates the interface as static-access mode.
Switchport access vlan vid	This command assigns the interface to the VLAN VID.
	Use the no form of this command to reset the static-access VLAN to
	default VID 1.
End	Return to Enable mode.

7.2.2 Trunk (IEEE 802.1q)

By default, a trunk port is a member of all VLANs. Membership can be limited by configuring a VLAN Allowed List.

Use the following commands, beginning in config mode, to assign an IEEE 802.1q trunk port:

Command	Purpose
interface IFNAME	Enter the interface name to access the interface configuration mode.
switchport mode trunk	This command designates the interface as IEEE 802.1q trunk-access
	mode.
	Use the no form of this command to reset to the default of static-
	access mode.
switchport trunk native vlan vid	This command assigns the native VLAN for the trunk port. Use the no
	form of this command to reset the native VLAN to VID 1.
Switch(config-if-IFNAME)# end	Return to Enable mode.

68 Asante IntraCore IC36240 User’s Manual