Asante Technologies IC36240 user manual Click Apply

3.Click Apply

2

3

4Asante

4.Click on the VLAN ID number in the VLAN table to move to the configuration page for the new VLAN

From the VLAN Group Configuration page, you can enable or disable the management access and link a VLAN to a specific port.

Use the VLAN feature to partition a single IntraCore IC36240 into a VLAN each containing its own set of ports. Packets are forwarded only between ports belonging to the same VLAN. This allows you to restrict access from one segment to another to increase network security or to reduce traffic. To set up VLANs you should specify the ports belonging to the VLAN, the set the IP configuration, individual access map associated with a set of VLANs and enable tagging. Once you have configured the VLAN and copied the information into the startup-config file, the VLAN information applies to the default.

Follow these steps:

The scroll menu on the right side of the screen shows the available ports.

1.Click on a port number that the VLAN will be associated with from ports scroll menu.

1

2

2.Click on the Move port to this VLAN button

The box on the left side of the screen confirms the VLAN was linked to the desired port.

91 Asante IntraCore IC36240 User’s Manual