Moving Around on the Command Line | Asante Technologies IC36240

4.8.1 Moving Around on the Command Line

Use the following keystrokes to move the cursor around on the command line in order to make corrections or changes:

Keystrokes	Purpose

Press Ctrl-Bor the left arrow.	Move the cursor back one character.

Press Ctrl-For the right arrow.	Move the cursor forward one character.

Press Ctrl-A.	Move the cursor to the beginning of the command line.

Press Ctrl-E.	Move the cursor to the end of the command line.

Press Esc B.	Move the cursor back one word.

Press Esc F.	Move the cursor forward one word.

Note: The arrow keys function only on ANSI-compatible terminals such as VT100s.

4.8.2 Completing a Partial Command Name

If you cannot remember a complete command name, press the Tab key to allow the system to complete a partial entry.

Keystrokes	Purpose

Enter the first few letters and press Tab.	Complete a command name.

If your keyboard does not have a Tab key, press Ctrl-I instead.

In the following example, when you enter the letters “conf” and press the Tab key, the system provides the complete command:

Switch# conf<Tab>

Switch# configure

The command is not immediately executed, so that you may modify the command if necessary. If you enter a set of characters that could indicate more than one command, the system simply lists all possible commands.

You may also enter a question mark (?) to obtain a list of commands that begin with that set of characters. Do not leave a space between the last letter entered and the question mark (?). For example, three commands in privileged mode start with co. To see what they are, type co? at the privileged EXEC prompt:

Switch# co? configure copy Switch# co

33

Asante IntraCore IC36240

User’s Manual

Image 33

Asante Technologies IC36240 Moving Around on the Command Line, Completing a Partial Command Name, Keystrokes Purpose

Contents

IntraCore IC36240 Series IntraCore IC36240 Layer 2+ Gigabit Ethernet Switch User’s Manual Table of Contents Password Service Password-Encryption Snmp Configuration Commands Trunk Ieee 802.1q Technical Support and Warranty Introduction Features Front and Back Panel Descriptions Package Contents LED LEDs Console Interface Management and Configuration Hardware Installation and Setup Installation OverviewSafety Overview Recommended Installation Tools Installing into an Equipment RackPower Requirements Environmental Requirements Installing the Optional External Power Supply SFP Mini Gbic PortsEquipment Rack Guidelines Connecting Power Connecting to the Network1 10/100/1000BaseT Ports Cabling Procedures Pin Number Pair Number & Wire Colors Gigabit Ethernet Ports Cabling Procedures Asante IntraCore IC36240 Connecting to a Console Initial Software Setup User Access Verification Password Connecting to a PC Passwords and Privileges Commands Privileges CommandsEnable Password Service Password-Encryption Password Configuring an IP Address Login SecurityUsername Command Password and login Commands System Boot Parameters Restoring Factory DefaultsSetting a Default IP Gateway Address Switchconfig# ip default-gateway User Top User Exec Mode Understanding the Command Line Interface CLIAccess Each Command Mode Document Conventions Command Show ? Purpose Privileged Top Privileged Exec Mode Global Configuration Mode Switch# configure Command Exit End Ctrl-Z Purpose Spanning-Tree Configuration Mode Interface Configuration Mode Advanced Features Supported within the Command Mode Vlan Configuration ModeSpanning-tree mst configuration Example of Context Sensitive Help Command Help Purpose Switch# configure ? Checking Command Syntax Using the No and Default Forms of Commands Using CLI Command HistoryUsing Command-Line Editing Features and Shortcuts Keystrokes/Command Purpose Moving Around on the Command Line Completing a Partial Command NameKeystrokes Purpose Editing Command Lines That Wrap Redisplaying the Current Command Line Deleting EntriesScrolling Down a Line or a Screen Transposing Mistyped Characters Controlling CapitalizationKeystrokes Setting the System Clock Managing the System and Configuration FilesSwitch# clock ? Switch# clock set 092930 28 January Switch# reload cr Testing Connections with Ping Tests Changing the PasswordSpecifying the Hostname Enabling the System Log Displaying the Operating Configuration Managing Configuration FilesConfiguring from the Terminal Switch# show running-config Newname# copy running-config startup-config Copying Configuration Files to a Network Server Switch# copy startup-config ? Switch# copy running-config Switch# copy running-config TftpSwitch# copy running-config tftp//192.168.0.1/my-config Authentication Configuring SnmpAccess Control Switch# copy tftp//192.168.123.59/my-confg running-config Create or Modify Access Control for Snmp Community Security LevelsSupport Establish the Contact and Location of the Snmp Agent Command Purpose Snmp-server community string view Snmp Configuration Commands Configuring Spanning Tree Spanning-tree mst? Spanning Tree Parameters Rapid Spanning Tree Protocol Rstp Spanning Tree Port ConfigurationPort Priority Port Path Cost Switchconfig# spanning-tree priority priority Configuring Switch/Bridge PriorityRapid Convergence Enabling Rapid Spanning Tree Configuring an Edge Port Configuring Link TypeConfiguring Port Path Cost Configuring Port Priority Multiple Spanning-Tree MST Vlan Configuring Vlan Switchconfig# mac-address-table aging-time MAC Address TableShow mac-address-table Configuring IP Assign IP Addresses to SwitchClass Address or Range Status Define a Static ARP Cache Establish Address Resolution Managing IP Multicast Traffic Configuring IgmpIgmp Overview Forwarding Unknown Multicast Packets Switchconfig-if-veth1#ip igmp query-interval Using Access ListsCommand Purpose Ip igmp query-max-response-time Host-query messages Using a Classification ACL Asante IntraCore IC36240 Create a Standard Access List Create a MAC Access List Create an Expanded Access ListSwitchconfig# mac access-list standard Access-list 101 deny ? Access-list 101 ?Access-list 101 deny tcp ? Access-list 101 deny tcp 192.168.123.0 0.0.0.255 ? Applying an Access List to an Interface Creating an Access List with a NameAccess-list ? Access-list standard ? Switchconfig# access-list 110 permit udp any any eq Configuring Common Access Lists Access-list 101 deny ip any any Creating or Modifying a Vlan Vlan Configuration Switch# show vlan Switchconfig-vlan#port-member delete ethDeleting a Vlan Static Access Vlan Port Membership ModesTrunk Ieee 802.1q Switchconfig# end Command Purpose Switchconfig# vlan dot1q tag native Configuring Weighted Fair Queuing Quality of Service ConfigurationMonitoring Weighted Fair Queuing Lists Priority Queuing Traffic Shaping Configuring Traffic Shaping for an InterfaceDefining the Priority List Monitoring Priority Queuing Lists Configuring Traffic Shaping for an Access List Configuring Rate LimitMonitoring the Traffic Shaping Configuration Generic Traffic Shaping Example Asante IntraCore IC36240 Main Configuration Menu Configuring the Switch Using the GUI Front Panel Information Screen Information Screens General Information Screen Assign IP Addresses to Switch Class Address or Range Status Individual Port Configuration Screen Port Configuration Menu Asante IntraCore IC36240 Press go Spanning Tree Protocol Configuration STP Port Configuration Global STP Bridge Configuration Snmp Configuration Asante IntraCore IC36240 Address Table Screen Asante IntraCore IC36240 Asante IntraCore IC36240 Vlan Configuration Asante IntraCore IC36240 Click Apply Igmp Configuration Asante IntraCore IC36240 Asante IntraCore IC36240 Web CLI Screen System Clock Menu Save Problem Possible Solutions Appendix a Basic Troubleshooting Physical Characteristics Appendix B SpecificationsEnvironmental Range Performance Standards Compliance Technical Support and Warranty FCC Compliance Statement Important Safety Instructions Appendix C FCC Compliance and Warranty Statements IntraCare Warranty Statement Appendix D Online Warranty Registration Index Access List Igmp LED Safety Priority Queuing Vlan