Connecting the Remote Wake-Up Cable

37

WARNING: Make sure that the PC power cord is unplugged. Only properly trained and authorized personnel should perform service. Contact your PC manufacturer for information about safe service techniques.

To connect the Remote Wake-Up cable:

1Make sure that the NIC is properly installed in a PCI slot.

2Insert the Remote Wake-Up cable into the RWU connector on the NIC.

Twist the cable twice before attaching the cable to the PC.

3Attach the other end of the cable to the connector on the PC motherboard.

Refer to your PC documentation if you need help locating the connector.

4Replace the PC cover and plug in the power cord.

Do not turn on the power to the PC. Continue at step 3 in Installing and Connecting the NIC.

Page 36 Page 38
Page 37
Image 37
3Com 3CR990-TX-95, 3CR990-TX-97, 3CR990SVR97, 3CR990SVR95 manual Replace the PC cover and plug in the power cord
Page 36 Page 38
Top Page Image Contents