3Com 3CR990SVR97, 3CR990SVR95 Press Enter, Press Insert again, Select 3C99x, and then press Enter

94CHAPTER 5: INSTALLING NETWARE CLIENT AND SERVER DRIVERS

4Press Enter.

The Internetworking Configuration screen appears.

5In the displayed menu, select Boards, and then press Enter.

6Press Insert.

A list of currently installed drivers appears.

7Press Insert again.

The New Driver dialog box appears.

8Specify the directory: a:\nwserver\3c99x.lan

9Press Enter.

An updated list of installed drivers appears.

10Select 3C99x, and then press Enter.

You are prompted to name the NIC, for example: 3c99x_1.

11Type the name of the NIC and press Enter.

You are prompted for the slot number. For information on how to verify the slot number, see Verifying the PCI Slot Number on page 99.

12Enter the slot number, and then press Enter.

13Press Esc, Enter (to save), and then Esc.

The Internetworking Configuration screen appears.

14Select Bindings, and then press Enter.

The configured protocols for installed NICs appears. (This list will be empty if no protocols are currently bound to the NIC.)

15Press Insert.

The Select From the List of Configured Protocols screen appears.

For NetWare 5.0:

■The default To a Network Interface is selected. Press Enter.

The Select a Configured Network Interface screen appears.