3Com 3CR990SVR97, 3CR990-TX-97 Do one of the following, Click Yes, Update Device Driver Wizard

46CHAPTER 3: INSTALLING NIC DRIVERS IN WINDOWS

network, this entry must be exactly the same for all the PCs in your network.

■Computer Description—Displays additional details to other users on the network about this PC. For example, you could specify that the PC is connected to a printer. Filling in this field is optional.

4The Insert Disk screen appears, prompting you for the Windows 95 CD-ROM. Click OK.

The Copying Files screen appears.

5Do one of the following:

■If the Windows 95 files were not copied to your hard drive, remove the EtherCD from the CD-ROM drive, insert the Windows 95 CD, enter the path to the CD-ROM drive, and then click OK.

■If the Windows 95 files were copied to your hard drive, enter the path to the directory containing these files, and then click OK.

Files are copied. The Systems Settings Change screen appears, prompting you to restart your computer.

6Click Yes.

You must restart your computer to complete the installation.

The installation is complete. To verify that the installation was successful, see Verifying Successful Installation on page 48.

After Windows restarts, double-click the Network icon in the Control Panel and make sure that the configuration settings are properly set for your network environment. Contact your system manager for assistance.

Update Device Driver Wizard

If the Update Device Driver Wizard starts, follow this procedure to install the NIC driver:

1Insert the EtherCD in the CD-ROM drive, and then click Next.

Windows finds the driver.