3Com 3CR990-TX-95, 3CR990-TX-97, 3CR990SVR97, 3CR990SVR95 Insert the Windows 95 CD-ROM and click OK

Installing DynamicAccess LAN Encryption Software 81

20Insert the Windows 95 CD-ROM and click OK.

If you are prompted to enter the path to the Windows 95 files (usually d:\win95), enter the appropriate path and click OK.

The Insert Disk screen appears, prompting you to reinsert the Windows 95 CD-ROM.

21Verify that the Windows 95 CD-ROM is inserted in the CD-ROM drive and click OK.

Continue to respond to prompts for the Windows 95 CD-ROM, and specify the appropriate path for Windows 95 files to be copied until the System Settings Change screen appears, prompting you to restart the computer.

22With the System Settings screen displayed, click Yes to restart the computer.

The system has completed copying files from the EtherCD and Windows 95 CD to the destination locations, set up the registry, built drivers, and updated bindings.

After you have successfully installed the DynamicAccess LAN Encryption client, the physical adapters (NICs) and upper level protocols (TCP/IP, IPX, etc.) in your computer bind to the virtual adapters created by the DynamicAccess LAN Encryption software. The bindings of the upper level protocols to the physical adapters are removed and replaced with bindings to the virtual adapters.

If you have not yet created one or more connection profiles, you may be prompted to use the DynamicAccess LAN Client dialog box to create the profiles. See the “Creating a Connection Profile” topic in the administrator’s guide for more information.

During installation, the policy files tssecmap.cfg and tssecdes.cfg are automatically copied from the EtherCD to your PC. See the “3Com LAN Encryption Secure Network Map File (tssecmap.cfg)” topic and the “Security Level Definition File (tssecdes.cfg)” topic in the administrator’s guide for more information.