3Com 3CR990SVR95, 3CR990-TX-97 manual Starting the 3Com NIC Diagnostics Program, Restart Windows

Starting the 3Com NIC Diagnostics Program 51

8Restart Windows.

The installation is complete.

Starting the 3Com NIC Diagnostics Program

To start the 3Com NIC Diagnostics program:

1Open the Windows Start menu.

2Select Programs, and then 3Com NIC Utilities.

3Click 3Com NIC Doctor.

The 3Com NIC Diagnostic screen appears. For instructions on using the program, see Running the NIC Diagnostics Tests on page 144.

Alternatively, you can also start the 3Com NIC Diagnostics program using the following procedure if the 3Com NIC Diagnostics icon is displayed on right side of the Windows task bar:

1Double-click the 3Com NIC Diagnostics icon.

The 3Com NIC Diagnostic screen appears. For instructions on using the program, see Running the NIC Diagnostics Tests on page 144.

Updating the Network Driver and NIC Software

The latest 3Com network drivers can be downloaded from:

http://support.3com.com/infodeli/tools/nic/

To update the network driver and NIC diagnostic software:

1Turn on the power to the PC and start Windows.

2Insert the EtherCD (or disk 1 downloaded from the Web or created from the EtherCD) in the appropriate drive in the PC.

The EtherCD Welcome screen appears.

3Click NIC Software.

4Click NIC Drivers and Diagnostics.

5Click Update NIC Driver.